December 2, 2016
Router bits cut better miters
November 29, 2016
When I was making a 2-in.-thick oval lamp base and routing a profile on the edge with a big bearing-guided bit, I needed to make multiple shallow passes for a…
February 10, 2016
Large router bit with four cutting edges for removing stock quickly.
December 5, 2013
For flawless results, pick the right cutter and bearing for the job
June 6, 2013
There are three versions: flush, with the bearing on top; pattern, with the bearing on the bottom; and combination, with bearings on top and bottom
Q: After using a straight bit in my router recently, the bit wouldn’t come out. I loosened the collet, but the bit is stuck good. How can I get it out?…
February 7, 2013
These bits have four cutting edges, with two of them angled backward to create a negative shearing cut
August 31, 2012
Valfor Tools Groove Center and 2-axis Depth Gauge combine to simplify router lock-miter bit setup.
August 24, 2012
Top of the line bits eliminate tearout
July 28, 2011
Q: I have a pair of edge-banding router bits (eagleamerica.com, No. 190-2075), but whenever I use them I get snipe at the trailing end of my plywood panels and the…
Subscribe now and save up to 56%
© 2017 The Taunton Press, Inc. All rights reserved.
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 56%