showing 1 - 20 of 27 posts
1 2 Next >
Needle and thread have been substituted with hook and thread with this Shaker-style sewing desk that I will use as a fly-tying station. Although the piece was inspired by antique originals from the...
Drawings,measures, and assembly process by Rsantos
Art Decor kitsch style drawer chest is made using MDF, and melaminic particle boards.
Jointning system is "pocket hole", using self taping, washer...
Based on the decor of his client’s home Mikkelsen designed and built this unit to have a painted finish. Choosing poplar, and birch plywood Mikkelsen added geometric details that stand out when painted with high-gloss white paint. See the article in FW#103, pp. 62-66 for construction and painting details.
The design for one of these hanging tool cabinets can be found in the October 2006 issue of Wood magazine.
Each of my two daughters has a basement workshop in a small room that is shared with a gas...
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
This shop would be our attic. the walls are slanted, so table top tools work best for storing, and have floor space. This also allows me to stock lumber on the shorter knee walls. So far...
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
My shop currently consists of a home brew router table, rolling disk/belt sander cart, and a power miter saw (waiting for its own rolling cart). Everything else are hand-held power tools...
Here is a layout of my working production shop. We have just the basic tools with plenty of room left over for assembly, cabinet storage, and finishing.
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
This design came out of talking to my design class about what a table really is; "describe it," I said, and they said "square with a leg in each corner", amongst others. What does the leg look like...
My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...
A MITRE SAW FENCE SYSTEM WHICH I INVENTED ,DESIGN AND BUILD TO PREVENT OFFCUTS FLYING OFF THE BACK OF THE SAW AND TO PROVIDE BETTER SUPPORT TO THE WORK PIECE DURING THE CUT
THE FENCE SYSTEM IS...
I have Been on a rocking air plane kick. No patterns, just wing it as I go. Also those Bench Cookies look like just what I need!
Plywood construction, painted Ben Moore: Au Natural, boxes of different depths, heights, and lengths. bottom case is a hot water base board heater cover.
Well... the contest rules didnt specify a size restriction so I thought I'd send this in. It is a wall unit created by bending sheets of wood to capture the curve you see.
Who would have imagine that the world inside the box would be replaced by flat screens. I never meant for these to be nostalgia... Oh well.
Save up to 51% on Fine Woodworking
Become a Better Woodworker