showing 1 - 20 of 39 posts
1 2 Next >
The Pennsylvania Germans carried on a folk tradition of making pine chests decorated with the floral and figural motifs of traditional German manuscripts. These chests, perhaps...
Woodworker: Mario Rodriguez
Typical of mantels found in 19th-century farmhouses, this mantel's flat relief and plain treatment, based on the styles of classical architecture, perfectly frame the...
This novelty end table by Charles Miller is made from Douglas fir. The fish is carved from sugar pine and is attached to the table in lieu of a third leg. The edge of the table has been flattened to its full thickness and let into the side of the fish. It is then pocket-screwed from below and glued. The fin above gives added stability.
Bowback Windsor chair in maple, pine and hickory, and finished with milk paint.
A knockdown dining table in maple and pine by Tim Gilchrist.
This Shaker-style tall clock is made from pine and finished with Covered Bridge red paint. Its construction features many traditional methods
Bookcase of cherry, white pine, artist’s pressboard, figured maple and ebony. It is finished with shellac, paint and an oil-and-varnish mix.
This Windsor-style chair is made from hard maple, white pine, tulip poplar and hickory. It is finished with oil-based paints.
Lauziere’s early American-inspired cabinet is made from shop-dried white pine and finished with paint.
This mammoth Shaker-inspired workbench took Stair a year to complete. The woods used are maple, oak, pine, and cherry. The bottom of the bench is painted; while the top has a shellac finish.
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
This shop would be our attic. the walls are slanted, so table top tools work best for storing, and have floor space. This also allows me to stock lumber on the shorter knee walls. So far...
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
My shop currently consists of a home brew router table, rolling disk/belt sander cart, and a power miter saw (waiting for its own rolling cart). Everything else are hand-held power tools...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
Don't Fence Me In Queen Size Bed, Hand constructed from Pine and hand carved/painted with acrylic paints and acrylic finish.
Get ready for christmas
now is the time to start planning
make a good pattern and cut out with a router
if you need help let me know
i have given many sleighs to friends over the years and they...
Save up to 52% on Fine Woodworking
Become a Better Woodworker