showing 1 - 20 of 47 posts
1 2 3 Next >
Overal size is 185x100x25 cm. By cutting out three equal sections in each board starting at 30 cm in from the end, the four bendable strips were thus left. The tricky part was fitting the shelves...
Two students receive the OAS Future Craftsmen Scholarship.
This tool cabinet was inspired by Mark Laub's work. It is made from birdseye maple and mahogany. All the dovetails were hand cut and so were the tennons. Finished with Shellac 44"H x 55" W x 14" D.
Blanket Box for my daughter. Walnut frame and maple panels.
Finished with shellac. Aromatic cedar inside.
The Stand-Up Desk was designed to ease a friends back-problems from too much sitting on a normal desk. I chose cherry and mahogany with small wenge elements. The legs and cross-braces I shaped to...
ROOSEVELT BOURBON SIDE TABLE
Materials: Maple Burl, Zebrawood, Steel
Dimensions: 25"L x 19"W x 24"H
Finish: Hand-rubbed oil (fully cured), shellac, and spray lacquer for added...
Glove box of Maple and Morado.Handcut dovetails.Workshop-cut Morado veneer.French lacquered top.Mobile compartments.Carnauba and Beeswax finish.
Made with handtools.
Dimensions : 6.5" x 14" x...
I have always wanted to build a Krenov Cabinet and the chance came to build a new display cabinet. It is made of curly maple which was tricky to work with.
I followed the article in FWW208...
Spalted Maple and jatoba 40-1/2 inch x 16-1/2 inch x 31 inch tall with a shellac finnish
built by Anderson Woodworks Olympia wa
I didn't want to build it the easy way, so I angled the sides at 88°. This of course caused a whole tail of complications. I got what I asked for. The main wood is cherry and the fronts were...
Woodworker: Todd DeRosa
This marquetry box was software consultant Todd DeRosa's first major woodworking project. He started out making a simple Christmas present for his 8-year-old daughter, but...
Woodworker: Nancy Brady
Nancy Brady was pregnant when she made this appropriately shaped chest of drawers for her final project at École National du Meuble (school of furniture design) in Montral...
Woodworker: Steve Casey
Steve Casey built this console for a self-contained home-theater system and made sure to include plenty of media-friendly features. Tall drawers offer ample storage for...
Woodworker: German F. Plessl
The design for this bubinga and pear entry table came from Plessl’s desire to create a natural “tree-branch form” that also incorporates classical and modern...
Drum-shaped table in. mahogany, sycamore, and aluminum by Chris Davidson.
My daughter, wanting a unique clothing storage cabinet, asked for and I responded designing and making this Armoire. The Armoire was fabricated uing 4/4 quartersawn white oak structure with 1/4" oak...
My daughter needed a table for her "studio". Instead of having a pen holder for pencils and brushes on top of the table I made three hanging underneath the table.
There are a video on YouTube showing...
Hello everyone; I've been absent from these pages for a while as I've been shepherding my students here and I feel like a proud father. I'm showing off a selection of their work all designed and...
Save up to 51% on Fine Woodworking
Become a Better Woodworker