|
|
|
|
tag: modern
Subscribe to RSS feed
Tinker Table
The grain of the Zebrano wood (aka Zebra Wood) on this Tinker Table seems to dance as the light hits it from different angles. Pictures will never do it justice. The legs have subtle...
view details
Monument to the End of Time
1 commentSince according to the Myan Calander the end of the world is coming I thought I would do a sculpture about that event before it happens.
view details
Ash, Alumimun and Acrylic Stair Parts
The stair hand rail, ballasters caps and base plates are all solid ash and constructed with an internal nut and bolt system before the tight joint fasteners became popular. The vertical ballasters...
view details
Mickey's Wall Unit # 8
The 2 upper main and 2 lower base speaker enclosures were design and built with the same details as the previous posted story, Mickey's Wall Unit # 7, explaining the construction method using the...
view details
Mickey's Wall Unit # 7
The multi layered soffit was constructed using 3/8" bending plywood. The outer or face layer of the 3 layered soffit is an accustically clear, pleated silky black fabric, having a sub layer of a 1...
view details
Mickey's Wall Unit # 6
The center channel speaker cover was constructed using 3 separate layers of 1/8" bending plywood. The thin layers of plywood were bent and glued using the black primed mdf side pieces...
view details
Mickey's Wall Unit # 5
The bar top was built using mdf. The bar base was built using 12 layers of 3/8" bending plywood all laminated together to make a 3" thick curved platform base to support the bar top and...
view details
Mickey's Wall Unit # 4
These artistic sculpted curves were constructed using 3/8" thick bending plywood. They are basically all vertical layers that are separate dby the horizontal bulk head layers to keep the curved...
view details
Mickey's Wall Unit # 3
Mickey's Wall Unit post #3. This is the stereo equipment pullout system that I hand sketched out in full scale drawings, gave to the metal fabricator where I had worked hand and hand...
view details
Mickey's Wall Unit # 2
Post #2 of Mickey's Wall Unit. My sincere apologies, descriptions and explanations will need to be edited at a later time. Looking through the pink lighted doorway is a white painted kitchen which I...
view details
Mickey's Wall Unit
1 commentThis wall unit and bar were constructed of maple plywood for the main boxes. Bending plywood for curved flat surfaces. Mdf for the compound curved surfaces which was laminated to 3" thick in...
view details
Curved Bar Cabinet
This bar cabinet is constructed of maple plywood for the main box. Bending plywood for the curved surfaces. Three small niche shelves with a frosted plexiglass curved backing plate with optional rear...
view details
"Take Time to Dance"
A White Oak and Pine wood sculpture made using steam bending, fabric softener bending and heat bending techniques. No metal fasteners were used, only a little glue and lots of friction based on...
view details
I call this wood sculpture "Discarded"
I call this wood sculpture "Discarded" because it was made of some discarded pieces of wood some of which I got from a scrap bin. This is appropriate because it represents a number of people...
view details
White Painted Vanity
The cabinet box and the mitered drawer boxes are built from maple plywood with a natural lacquered finish. The door and drawer fronts are mdf which will have a white lacquered finish.
view details
Curved Motorized Maple Wall Unit
1 commentThis curved wall unit is constructed of maple plywood and also a bending plywood lamination for the curved doors. The interior drawer faces and drawer boxes follow the curve of the unit. The motor is...
view details
Zebrawood Bed
This photo was edited to appear as if the bed was in the African plains with zebra running in the background. In the photo is a scaled model of a bed about 12" wide. The actual bed is king size with...
view details
'Canopy' Coffee Table
A modern original coffee table that makes a visual statement. The base is smooth-ground welded steel with a 'Japanese brown' patina, in a geometric stylized tree motif. The polished top is a canopy...
view details
19 Ton Saltwater Aquarium
2 commentsThis saltwater fish tank weights in at 19 tons. Before construction began I set up a priliminary viewing of the cabinet shapes and form, as a full scaled mock-up made of a cardboard, for the clients...
view details
Bird's Eye Maple Kitchen
The exterior surfaces were veneered in a heavy figured bird's eye maple veneer using mdf as a more stablized substate. The interior cabinetry was lined with black mica and all the...
view details
|
|
Join Woodworkers Like You
283547 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
