tag: mdf


showing 1 - 20 of 27 posts
 1 2 Next > 
Sort By:


Subscribe to RSS feed
Art Deco Table

Art Deco Table

Woodworker: Byron J. BraytonThe majority of Brayton’s work is veneered because it provides him with unlimited design possibilities. This Art Deco-inspired table is completely veneered with Macassar...

view details
Bubinga, Mahogany and Glass Coffee Table

Bubinga, Mahogany and Glass Coffee Table

Woodworker: Wil Wolski Wolski, a student of Rosewood Studio's 9-month Craftsman Course, was inspired by modern era furniture and an exploration of curved planar elements mixed with traditional forms...

view details
Maloofallac

Maloofallac

Woodworker: Gary Clark Clark’s chair won third place in the art furniture category and first place for excellence in finishing at the 2007 Design in Wood exhibition organized by the San Diego Fine...

view details
Eames Table

"Eames" Table

Woodworker: Seth Deysach This table was built to sit next to an original Eames lounge chair. Janet Rooney, of j rooney design, created the design to complement the mid-20th-century style of the...

view details
Plywood Cabinet

Plywood Cabinet

Woodworker: Mark Edmundson Edmundson crafted this cabinet by sandwiching plywood on both sides of an MDF core. The doors feature frame-and-panel construction and a matched grain that Edmundson can...

view details
Dining Set

Dining Set

Woodworker: Patricia Harrison Harrison’s mission when desiging and crafting this dining set was to provide well-designed furniture for those who can’t afford the high prices of most craft...

view details
Entertainment Console

Entertainment Console

Woodworker: Steve Casey This modern credenza was designed around the large plasma screen television that hovers above it. Drawers and cabinets are used to store media, and open-faced cubbiesexpose...

view details
18th-Century French-style Dining Table

18th-Century French-style Dining Table

18th-century French dining table by Rob Anderson. The table is made from koa, MDF veneered with pommele sapele, satinwood and purpleheart, and features gilt bronze on the knees and ankles formally known as Ormolu. Ormolu was popular in 18th-century French furnitures as both a decorative and protective element.

view details
Workbench

Workbench

John White crafted this workbench in Douglas fir. The bench uses 6 pipe clamps in a variety of configurations to give the bench its versatility.

view details
Coffee Table

Coffee Table

Owen’s cherry and slate coffee stable is a study in curves and balance. In order to achieve its flowing curves MDF was bent, lipped in solid wood and veneered. A hidden weight balances the table. The table’s missing leg is meant to mimic the missing corner of the inlaid slate.

view details
Bedside Table

Bedside Table

Roger Holmes’ bedside table features a curved drawer front, mitered cornice and top, and a plinth to raise it off the ground.

view details
Dining Table

Dining Table

Harrison’s prototype dining table is constructed of MDF, plastic laminate and paint.

view details
Southwestern-style Side Table

Southwestern-style Side Table

Elia’s side table is made from red oak, red-oak veneer over MDF and is finished with wiping stain covered with a water-based lacquer.

view details
Southwestern-style Coffee Table

Southwestern-style Coffee Table

Inspired by southwest design Elia crafted this coffee table from red oak, and red-oak veneer on MDF. The piece is finished with a wiping stain covered with a topcoat of water-based lacquer.

view details
Art Deco-style Cabinet

Art Deco-style Cabinet

Bellonby crafted this Art Deco-style cabinet out of solid and veneered Honduras mahogany. The cabinet features marquetry on the front along with cornices indicative of the period. The piece is finished with varnish.

view details
Oval Coffee Table

Oval Coffee Table

Burkin crafted this table from maple using a lamination-bending technique.

view details
Elliptical Coffee Table

Elliptical Coffee Table

Woodworker: R.J. Spomer This elliptical coffee table and matching demilune end table was Spomer's first full veneer project after buying a veneer press. The table top is anigre veneer over anMDF...

view details
Mickeys Wall Unit # 5

Mickey's Wall Unit # 5

The bar top was built using mdf. The bar base was built using 12 layers of 3/8" bending plywood all laminated together to make a 3" thick curved platform base to support the bar top and finished in...

view details
Mickeys Wall Unit # 4

Mickey's Wall Unit # 4

These artistic sculpted curves were constructed using 3/8" thick bending plywood. They are basically all vertical layers that are separated by the horizontal bulk head layers to keep the curved...

view details
Mickeys Wall Unit # 3

Mickey's Wall Unit # 3

Mickey's Wall Unit post #3. This is the stereo equipment pullout system that I hand sketched out in full scale drawings, gave to the metal fabricator where I had worked hand and hand with him...

view details
showing 1 - 20 of 27 posts
 1 2 Next > 

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

354624 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

mcerverav mcerverav
joined Aug 29
curtcarter curtcarter
joined Aug 25
tgoebel tgoebel
joined Feb 24

bobaronson bobaronson
joined Mar 28
user-3240834 user-3240834
joined Mar 3
mainewoodhead mainewoodhead
joined Mar 15


Create your profile now!