tag: maple

showing 1 - 20 of 27 posts matching WorkBench [X]
1 2 Next >

Sort By:

Workbench - Monster, bombproof, not so (well kind of)

Darrin_G, member | February 23rd, 20135 comments

Legs and lower stringers are 6x6 alder, upper stringers 3x6 alder (all reclaimed). Top is 4x24x96 maple with a Lee Valley face vise with hickory jaws. All joined with single and double slip...

view details

Essential Workbench

kbiniowa, member | December 31st, 20122 comments

This project was completed using Lon Schleining's plan from Fine Woodworking Magazine. The bench is constructed from hard maple. I finished the top with danish oil, the base is finished with an oil...

view details

New Workbench

Tym40, member | November 24th, 2012

New Bench: Top is reclaimed African Mahogany countertop. Base is from some Old Growth Dougals Fir that had been cut and stored in an attic over 40 years ago. Drawbore Mortise and Tenon constructionI...

view details

Intermediate Workbench Video Series

epirnik, member | June 28th, 201223 comments

A serious workbench for woodworkers with limited shop space

view details

Dream Workbench

JonJLLJC, member | January 26th, 201270 comments

My ultimate workbench-- finally finished! The bench has a tail vise, a 24" face vise, and a patternmaker's vise. Overall size is 36" x 92". The top is 4" thick laminated hard maple with a 5" bubinga...

view details

Workbench

MTCondon, member | December 28th, 20113 comments

I'm a first year student at the Furniture Institute of Massachusetts. This was my second required project, and the requirements were mortise and tenon construction with four legs and a top. Phil...

view details

Bev Mart

hapner, member | December 7th, 2011

This shop would be our attic. the walls are slanted, so table top tools work best for storing, and have floor space. This also allows me to stock lumber on the shorter knee walls. So far...

view details

I wish!

Dthirsh, member | October 19th, 2011

Open floor plan with plenty of windows for natural light and open feel. Bathroom and drafting/sharpening/tool maintenance room. 16' garage door for easy access to shop, and easily accesable wood...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Dave's Workshop

dave100, member | September 8th, 20111 comment

After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...

view details

Three car Max space shop

greg261, member | August 16th, 2011

Every things on wheels so the plan is very fluide.

view details

Greg Stewart's unorthodox Scottish shop.

Gregs83, member | July 20th, 2011

A very unorthodox setup for a shop none the less apart from hand tools its kind of workable in a h&s contravening haphazard way!A place to escape and create.

view details

Pop's 12' x 16' woodshop

Dpop24, member | July 1st, 2011

This plan is for my shop that is going to be built into our new house. I have very limited space inside one of the garages and I will wall in a 12' x 16' dedicated shop. I know this is...

view details

work in progress

spartaman, member | April 30th, 2011

four car garage, one section used as workshop. need ideas on how to make the division more functional. tons of room.

view details

Recycled Materials Make for One Great Budget Workbench

KellyJDunton, member | March 25th, 20119 comments

A couple of choice estate sale finds inspire one FW staffer to put together a solid workbench on a super-tight budget.

view details

New Workbench

WBGoodwin, member | November 24th, 20102 comments

I have wanted to build a new workbench for quite a while now. When I saw Matt's Monster Workbench in Fine Wood Working magazine, I new I had found the bench I wanted to build. His bench...

view details

Day 6 Building a Workbench: Legs, Feet, Braces and Stretchers

Bill_Peck, member | September 20th, 2010

Do you want to know how to make a really strong base for your workbench? I'll show you how!

view details

Workbench

Odrisan, member | December 16th, 20094 comments

Inspired by Lon Schleining's The Workbench, Scott Landis' The Workbench Book, and articles and videos from Fine Woodworking,I built this 31" x 72" x 36"tall workbench with a maple trestle and...

view details

Workbench with marquetry

juliette, member | November 23rd, 200910 comments

This is my workbench inspired by the works of Lon Shleining. In maple and mahogany. The two front door are made with marquetry.

view details

Chest with a workspace

bafaans, member | June 28th, 20094 comments

84L 36W 39H 13 Wood species used from local logger, Self Air dried, Salvaged stairs and pallets. 8 Months to complete. Demountable for easier transport.

view details

showing 1 - 20 of 27 posts
1 2 Next >