tag: maple


showing 1 - 20 of 134 posts matching tenons [X]
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Walnut and Curly Maple Bed

Walnut and Curly Maple Bed

This was my first commissioned work. An Asian inspired bed based on the customers ideas. I designed it in Sketchup. I went through about 6 versions until the customer said that's the one for me. The...

view details
New console table for a living room

New console table for a living room

This is a maple console table. I adapted the plan from a Quebec (Canada) woodworking magazine. I modified certain designs and functionalities elements. L'Atelier de l'Aubier - Saint-Lazare, Quebec...

view details
Contemporary Tool Cabinet

Contemporary Tool Cabinet

2 comments

This tool cabinet was inspired by Mark Laub's work. It is made from birdseye maple and mahogany. All the dovetails were hand cut and so were the tennons. Finished with Shellac 44"H x 55" W x 14" D.

view details
Another Maloof inspired Rocker

Another Maloof inspired Rocker

I live in Belgium - email : zrichard3@gmail.com

view details
Shop tool cabinet

Shop tool cabinet

small cabinet for space above my bench

view details
Garrett Hacks Elegant Side Table

Garrett Hack's Elegant Side Table

1 comment

I made some minor tweek's to Garrett's plans and wood selection.  The legs are cherry. Aprons and top are maple. Drawer bottom is Douglas fir. Ebony "socks" give the legs a chocolate dipped...

view details
Coffee Table

Coffee Table

This was the result of my first real furniture-making project in 2010. It is a sturdy coffee table that has stood up to heavy usage in our family room and has been very practical, with a shelf...

view details
Blanket Chest

Blanket Chest

2 comments

Blanket Chest for my wife for X-mas.  Walnut with bookmatched tiger maple panels.  Adopted from Woodcraft plans.  Pinned mortise and tenon joinery with maple pins.   Rockler torsion-stay hinges...

view details
Garrett Hack inspired table

Garrett Hack inspired table

1 comment

This little table is the result of another wonderful week at Rosewood Studio. Garrett Hack is an inspirational teacher. We all had excellent final results, each very different from the other. The...

view details
Walnut bench after Nakashima

Walnut bench after Nakashima

2 comments

Several years ago I bought a walnut slab from a sawyer in Missouri. I looked at it for several years, off-and-on, and a couple of months ago put it in my shop. Having nothing wide enough to flatten...

view details
Blanket Chest

Blanket Chest

1 comment

Blanket Chest from FWW #203 just a bit shorter with only one panel on each side. It is made from cherry and maple. I finished it with shellac and wipe on poly. This is my first attempt at a chest and...

view details
Split top roubo workbench

Split top roubo workbench

2 comments

Just completed the summer project... Split top Roubo. This project was a lot of work and is the biggest project I have tackled to date. I am fortunate to have stumbled onto a local woodshop that...

view details
Dining Table with Two Way Drawers

Dining Table with Two Way Drawers

5 comments

This is Stephen Hammer's design which I purchased from Tauton. I am a new, aspiring, and self-taught woodworker and the plan that I bought had a few errors; be sure that the leg assemblies are the...

view details
Inside-out Live Edge Coffee Table

Inside-out Live Edge Coffee Table

3 comments

My friend wanted me to build him a live edge coffee table with spalted maple. My worry was that the live edge would be too brittle and it would break when he put his feet up. I also didn't want to...

view details
Upholstered Wing Chair

Upholstered Wing Chair

Cherry legs, maple and poplar frame using mortise and tenon joinery. Fabric is Historic Deerfield Flame Stitch.

view details
Windsor arm chair

Windsor arm chair

Windor arm chair, carved volutes on end of crest rail and hand holds, milk paint finish followed by oil topcoat, Legs and stretchers are maple, spindles and bent parts are red oak, seat is pine.

view details
Jewelry Makers Toolbox - mineral stained walnut with curly maple

Jewelry Maker's Toolbox - mineral stained walnut with curly maple

I designed this for my daughter, Erin. It is a jewelers tool box for today's hobbyist jewler. The chest stands 50 inches tall with a 24 inch by 24 in base. There are two sizes of drawers with up to...

view details
Evas Cradle

Eva's Cradle

7 comments

Cradle I built for my youngest daughter. I was lucky to find these beautiful wide silver maple boards to construct body of cradle. Base is cherry and pivot points are ebony.

view details
Reed Bench

Reed Bench

5 comments

Built entirely from hard maple and walnut. Joinery is the key to  overall aesthetic as well as the strength of bench. The marraige of contemporary design and traditional woodworking techniques is...

view details
Essential Workbench

Essential Workbench

2 comments

This project was completed using Lon Schleining's plan from Fine Woodworking Magazine. The bench is constructed from hard maple. I finished the top with danish oil, the base is finished with an oil...

view details
showing 1 - 20 of 134 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

358980 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

teamwinner teamwinner
joined Dec 16
Scorpio51 Scorpio51
joined at 7:53 am
mebeljepara mebeljepara
joined Oct 22

CSKRao CSKRao
joined May 27
JoeKulesza JoeKulesza
joined Jul 11
MVSteve MVSteve
joined Mar 30


Create your profile now!