tag: maple


showing 1 - 20 of 193 posts matching oil [X]
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Cremation Urn

Cremation Urn

Built this urn for my friend's father who passed recently. I used maple for the sides. They had some very nice figure. Hand cut dovetails. The lid is spalted maple surrounded with walnut and maple...

view details
He comes like a roaring Lion

He comes like a roaring Lion

A table i made for my wife last christmas to hold her bible, it's made from African Mahogany, Quilted Maple, bird's eye Maple, Spanish Cedar and Buffard Frere banding inlay. I was lucky to get it...

view details
Another Maloof inspired Rocker

Another Maloof inspired Rocker

I live in Belgium - email : zrichard3@gmail.com

view details
Veneered Small Box

Veneered Small Box

Small veneered box made with cutoffs. Nice break to build something small after building something big.

view details
Roosevelt Cigar Side Table

Roosevelt Cigar Side Table

ROOSEVELT CIGAR SIDE TABLE   Materials: Maple Burl, Zebrawood, Steel Dimensions:  13"L  x  11"W  x 13"H Finish:  Hand-rubbed oil (fully cured), shellac, and spray lacquer for added durability...

view details
Roosevelt Bourbon Side Table

Roosevelt Bourbon Side Table

2 comments

ROOSEVELT BOURBON SIDE TABLE   Materials: Maple Burl, Zebrawood, Steel Dimensions:  25"L  x  19"W  x  24"H Finish:  Hand-rubbed oil (fully cured), shellac, and spray lacquer for added...

view details
Dining Table with Two Way Drawers

Dining Table with Two Way Drawers

5 comments

This is Stephen Hammer's design which I purchased from Tauton. I am a new, aspiring, and self-taught woodworker and the plan that I bought had a few errors; be sure that the leg assemblies are the...

view details
Jewelry Makers Toolbox - mineral stained walnut with curly maple

Jewelry Maker's Toolbox - mineral stained walnut with curly maple

I designed this for my daughter, Erin. It is a jewelers tool box for today's hobbyist jewler. The chest stands 50 inches tall with a 24 inch by 24 in base. There are two sizes of drawers with up to...

view details
Cradle for Nola

Cradle for Nola

3 comments

This is one of the first projects I made for some friends. The legs are connected to the post with sliding dovetails as are the rails to the cradle frame. I used heavy duty metal bearings for the...

view details
Maple Burl Table

Maple Burl Table

1 comment

This table is all about the wood, a simple base and a stunning maple burl top! Finished in natural oil, that brings out the depth and richness of color.

view details
Floating Maple and Mahogany Coffee Table

Floating Maple and Mahogany Coffee Table

Woodworker: Michael Lobby Lobby built this coffee table as an assignment in the Distance Mastery Program at Gary Rogowski’s Northwest Woodworking Studio. Lobby wanted to design a strong table with...

view details
Floating-Top Hall Table

Floating-Top Hall Table

Woodworker: Mike Harris Harris took the opportunity to make this hall table, a design he’d wanted to tackle for some time. Because he had never done inlay before, he said that was the most...

view details
Bent Maple Chair

Bent Maple Chair

Woodworker: Robert Galusha This chair was designed to be visually delicate yet have considerable strength. Galusha used a combination of steam-bending and laminating to achieve the fluid curves of...

view details
Nine-Drawer Jewelry Box

Nine-Drawer Jewelry Box

Woodworker: Gregg Roth Gregg Roth and his father harvested the lumber he used for this cherry and red oak jewelry box project from land that they own. He milled and dried it and built the case as a...

view details
Spectrum: The Necessaries Chest

Spectrum: The Necessaries Chest

Woodworker: Mark Whitley Whitley riffed off the concept of a Shaker apothecary cabinet to create this chest of drawers. Each drawer is hand dovetailed and Whitley dyed the inside of each a graduated...

view details
A Study in Grain Direction

A Study in Grain Direction

Woodworker: Mike Greenberg Greenberg used this box to explore grain direction and design. He resawed cherry and bird’s-eye maple boards to achieve a continuous grain wrap around the box and a...

view details
Bubinga and Curly Maple Desk with a Walnut Chair

Bubinga and Curly Maple Desk with a Walnut Chair

Woodworker: Noah Reiten Because a large desk can overpower a room, Reiten designed this one to have a lighter feel. He raised the drawer bank and added negative space above it, giving the legs a more...

view details
Mahogany and Lacewood Bed

Mahogany and Lacewood Bed

Woodworker: Amanda Broemel Living in a home where nearly every piece of furniture was designed and built by her father, Broemel, formerly of Springfield, Pa., turned to him for design input. The...

view details
Maple and Walnut Side Table

Maple and Walnut Side Table

Woodworker: Shawn Wright Wright crafted this small maple and walnut table out of necessity. The 15-year-old’s bedroom was recently remodeled but it was missing a place where he could set down his...

view details
Dancing Leg Hall Table

Dancing Leg Hall Table

Woodworker: Jason Ramey Ramey, a student at the Herron School of Art and Design, in Indianapolis, eschewed the tradition of straight-leg design and tried to create movement with a top cantilevered...

view details
showing 1 - 20 of 193 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

358962 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

mebeljepara mebeljepara
joined Oct 22
CSKRao CSKRao
joined May 27
JoeKulesza JoeKulesza
joined Jul 11

MVSteve MVSteve
joined Mar 30
KenGroves KenGroves
joined Feb 6
Rob_Appelman Rob_Appelman
joined Oct 12


Create your profile now!