tag: maple


showing 1 - 20 of 73 posts matching arts and crafts [X]
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Sculptural 4 Drawer Cabinet on Cantilevered Frame

Sculptural 4 Drawer Cabinet on Cantilevered Frame

1 comment

Sculptural 4 Drawer Cabinet on Cantilevered Frame Functional and Sculptural… …The frames are my refined interpretation of a barn structure …Showing the beauty and strength of wood in dynamic...

view details
Tittle piece of artwork

''Tittle piece of artwork''

Just a little piece of artwork I completed, the center portion is stained 'hard maple' with a chip carved celtic cross (the same as the one on my personal guitar I recently posted). I then inlayed...

view details
Krenov Style Hope Chest Case

Krenov Style 'Hope Chest' Case

This Krenov style case is a gift to my daughter as she prepares for her October 2014 marriage. I felt obligated to build a hope chest for her but, couldn't resist an opportunity to try my hand at a...

view details
Sewing Center

Sewing Center

1 comment

Sewing Centers / cabinets available for retail purchase tend to be large fold-out and fold-open units using mostly man-made materials and mass production joinery. After consultation with my local...

view details
Oneida Air Systems Awards Woodworking Students

Oneida Air Systems Awards Woodworking Students

1 comment

Two students receive the OAS Future Craftsmen Scholarship.

view details
Another Maloof inspired Rocker

Another Maloof inspired Rocker

I live in Belgium - email : zrichard3@gmail.com

view details
Maple and Cherry King Size Bed

Maple and Cherry King Size Bed

2 comments

A modified Matt Berger design.  quarter sawn spalted maple with cherry panels.  Used Freud door rail and stile bits for head/foot board.  Also used Freud raised panel bit for panels.  Finish with...

view details
Roosevelt Cigar Side Table

Roosevelt Cigar Side Table

ROOSEVELT CIGAR SIDE TABLE   Materials: Maple Burl, Zebrawood, Steel Dimensions:  13"L  x  11"W  x 13"H Finish:  Hand-rubbed oil (fully cured), shellac, and spray lacquer for added durability...

view details
Roosevelt Bourbon Side Table

Roosevelt Bourbon Side Table

2 comments

ROOSEVELT BOURBON SIDE TABLE   Materials: Maple Burl, Zebrawood, Steel Dimensions:  25"L  x  19"W  x  24"H Finish:  Hand-rubbed oil (fully cured), shellac, and spray lacquer for added...

view details
Inside-out Live Edge Coffee Table

Inside-out Live Edge Coffee Table

3 comments

My friend wanted me to build him a live edge coffee table with spalted maple. My worry was that the live edge would be too brittle and it would break when he put his feet up. I also didn't want to...

view details
Jewelry Makers Toolbox - mineral stained walnut with curly maple

Jewelry Maker's Toolbox - mineral stained walnut with curly maple

I designed this for my daughter, Erin. It is a jewelers tool box for today's hobbyist jewler. The chest stands 50 inches tall with a 24 inch by 24 in base. There are two sizes of drawers with up to...

view details
Blacker House Chair

Blacker House Chair

3 comments

I took William Ng's Blacker House chair class early last year. Since than, I've built a set of four in Walnut and two in Mahogany. All of the major joinery, except for the arms to legs, is cut using...

view details
The Four Year Project

The Four Year Project

155 gal. bow front salt water aquarium stand This project took forever to build. It all started when a neighbor asked me to install a bay window for them. He had his own aquarium business, like that...

view details
Round Tabouret

Round Tabouret

Woodworker: Kevin Rodel This round table is the first Arts and Crafts piece that Rodel ever built. A Harvey Ellis tabouret inspired this design in cherry. The top features an inlay of maple, oak and...

view details
Greene-and-Greene-style Writing Desk

Greene-and-Greene-style Writing Desk

Burton made this Greene-and-Greene desk from cherry, curly cherry, soft maple and ebony. The desk is finished with oil.

view details
Arts and Crafts-style Lamp

Arts and Crafts-style Lamp

Der’s combination of lamp and cabinet is made from cherry and curly maple. The piece features a reverse book-match on the doors and is finished with oil and wax.

view details
Arts and Crafts-style Chest of Drawers

Arts and Crafts-style Chest of Drawers

Sorenson’s Arts & Crafts-inspired chest of drawers features pillowed drawer fronts. It is made from pear, jarrah, western maple and Spanish cedar, and finished with shellac and wax.

view details
Cherry Bench

Cherry Bench

Once Helbok had the cherry plank that would become the seat he mixed it with soft maple to give the bench a subtle contrast. He finished the bench with a mixture of polyurethane, tung oil and linseed oil.

view details
Arts and Crafts-style Armoire

Arts and Crafts-style Armoire

Woodworker: Mark Dutton Dutton’s design for this armoire was inspired by his visit to the Stickley furniture plant in Manlius, New York. The walnut used for the carcase and drawer fronts came from...

view details
Arts and Crafts-style Armoire

Arts and Crafts-style Armoire

Woodworker: Mark Dutton Dutton’s design for this armoire was inspired by his visit to the Stickley furniture plant in Manlius, New York. The walnut used for the carcase and drawer fronts came from...

view details
showing 1 - 20 of 73 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

362814 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

wworker2 wworker2
joined May 11
markmech2002 markmech2002
joined Oct 30
jdecker jdecker
joined Jul 25

greg757 greg757
joined Dec 11
MatijaZajsek MatijaZajsek
joined Dec 8
lorenusstr lorenusstr
joined Sep 25


Create your profile now!