tag: mahogany


showing 1 - 20 of 712 posts
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Krenov Style Hope Chest Case

Krenov Style 'Hope Chest' Case

1 comment

A Krenov style case piece for my daughter's Hope Chest. Woods are found at local garage/barn sales this summer. Finished with tung oil and brix wax.

view details
Greene and Greene Inspired Gift Boxes

Greene and Greene Inspired Gift Boxes

1 comment

I was playing with some ideas for gift boxes and tried my hand at designing these in the Greene and Greene style.  They are joined with proud finger joints, the bottom incorporates cloud lifts, and...

view details
Custom Fly Fishing Net

Custom Fly Fishing Net

I am an avid fly fisherman and hobby woodworker. I was inspired by Greg at Sierra Nets to make my own. His nets are absolutely stunning. This is my first attempt but I'm please with the results so...

view details
Standing Jewelry Cabinet

Standing Jewelry Cabinet

This standing jewelry cabinet is made of maple, walnut, cherry and mahogany.  It stands about 4 feet tall and is about 20 inches wide.  It is finished with wet sanded satin poly. The main cabinet...

view details
Mesquite and Mahogany Console

Mesquite and Mahogany Console

A commisioned piece to provide a rustic TV console formed from a single bark-on, kiln dried mesquite slab. The 6ft slab was halfed, one half flipped to conform to the arch of the first and both...

view details
Mahogany and Leather Side Table

Mahogany and Leather Side Table

4 comments

I came across an incredibly lovely board of Santos mahogany one day, with swirls of vanilla and orange in the grain, that board is what inspired the whole piece.  The legs are ebonized maple with a...

view details
Quarter Circle

Quarter Circle

This hall table was a commissioned piece after the people had seen a similar table I had built which was only 48 inches in length. This piece is 60 inches in length and 13 inches deep, standing 30...

view details
Sculpture done with nails and tacks.

Sculpture done with nails and tacks.

2 comments

I decided to do another larger nail sculpture. This is of Van Goghs Starry Night and is 22" x 30" The frame is mahogany and the nails are pounded into two layers of plywood. I did drill pilot holes...

view details
Gamble Style Game Table

Gamble Style Game Table

This Jalen's third project. He is 16 years old.   This game table was designed by Darrel Peart using the Gamble House table for inspiration. I contacted Darrel and asked if he would allow me to...

view details
He comes like a roaring Lion

He comes like a roaring Lion

A table i made for my wife last christmas to hold her bible, it's made from African Mahogany, Quilted Maple, bird's eye Maple, Spanish Cedar and Buffard Frere banding inlay. I was lucky to get it...

view details
Mahogany Book Cabinet

Mahogany Book Cabinet

1 comment

A simple mahogany book cabinet that combines both open and closed storage. The piece is constructed with mortise and tenon joined panel frames. The mahogany front posts are concave in two planes...

view details
Oneida Air Systems Awards Woodworking Students

Oneida Air Systems Awards Woodworking Students

1 comment

Two students receive the OAS Future Craftsmen Scholarship.

view details
Mahogany Segmented Bowl

Mahogany Segmented Bowl

2 comments

This is my first attempt at a segmented bowl.  It's constructed of mahogany, with ebony, bloodwood and maple accents.  The stringing design in the bottom is bloodwood, ebony, and holly.  The 132"...

view details
Boxes

Boxes

1 comment

Since my pile of cut off lumber has slowly started to take over the shop I thought I would build a few boxes with it and practice some techniques that I have wanted to try. It is also a great way to...

view details
Contemporary Tool Cabinet

Contemporary Tool Cabinet

1 comment

This tool cabinet was inspired by Mark Laub's work. It is made from birdseye maple and mahogany. All the dovetails were hand cut and so were the tennons. Finished with Shellac 44"H x 55" W x 14" D.

view details
Mahogany Lowboy

Mahogany Lowboy

2 comments

This lowboy was inspired by a Dunlap highboy. Made of mahogany and poplar. Complete with Horton Brass, ball and claw feet, dovetailed drawers, and 3 fans. Finished with 7 coats of Shellac  33" H x...

view details
Greene and Greene sofa table

Greene and Greene sofa table

1 comment

Greene and Greene sofa table. This is a table from the Blacker House of witch the Greene brothers designed. I worked off a photo of the piece. The wood is Sipo Mahogany, Ebony and Poplar for the...

view details
First Father & Son Bed Project

First Father & Son Bed Project

1 comment

This King Louis XV Rococo style bed was made by both my son Eric and myself. This is our first father and son piece of furniture made together for a customer. Eric turned the four bedposts on the...

view details
Mahogany/Makore Amoire

Mahogany/Makore Amoire

One thing about old houses is a lack of closets so a friend asked for a large amoire.  The African Mahogany case is accented with Makore veneered door and side panels. The upper unit also holds...

view details
Inbox

Inbox

These are some inboxes I built to contain the clutter on my desk. I built a total of four. They are made from one mahogany board and mahogany veneer. I gave the other two away.

view details
showing 1 - 20 of 712 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

354612 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

mcerverav mcerverav
joined Aug 29
curtcarter curtcarter
joined Aug 25
tgoebel tgoebel
joined Feb 24

bobaronson bobaronson
joined Mar 28
user-3240834 user-3240834
joined Mar 3
mainewoodhead mainewoodhead
joined Mar 15


Create your profile now!