|
|
|
|
tag: Jewelry Box
Subscribe to RSS feed
The Cedar Chalet
2 commentsThis is a new style/technique for me in an attempt to keep the final product as close to O.E. (original equipment) as possible. The branch (O.E.) opens the lid for access to the upper compartments. ...
view details
Bandsaw Box Bonanza
7 commentsThis was a "one-time" project. Sanding 150+ pieces became tedious, but, the shop always had a pleasant fragrance! Some sapwood was punky so epoxy, plus sawdust, came into play. Time...
view details
Maple & Wenge Jewelry Box
5 commentsThis is a sculpted Tiger Maple Jewelry Box I just completed. The knob is wenge and the 2 removable trays are built with wenge and maple. The dividers are dovetailed together for strength. I...
view details
Painful Box
9 commentsThis is a box that has been 4 years in the making. The wood is claro walnut, curly maple, lacewood, and rosewood. It was a pain to finish as the idea came from my ex wife who wanted me to...
view details
NJB's jewelry box
2 commentsI just completed this for my daughter. Curly maple, Indonesian Rosewood, walnut Finished with home brewed Maloof oil with Butchers wax
view details
Dovetailed's Jewelry Box
4 commentsJewelry box designed to hold a lot of jewelry -- it has two storage trays inside, the top one removable. The box is particularly suited for a bride since it has special storage for the wedding...
view details
Jewelry box
A few years ago my wife needed a jewelry box, and at the same time I was starting to mess around with finger joints. I thought it might be interesting to bring the fingers of the drawers all...
view details
jewelry box
A gorgeous box fabricated with curly walnut and hardwoods. This design was inspired by a much more accomplished woodworker. The lid is made from solid woods, not veneer!
view details
Christmas in March
1 commentI finally finished the christmas present for my wife. The box consists of walnut sides and frame for the lid. Solid maple bottom with leather lining. the upper tray is solid cherry with fairly small...
view details
Holiday Gift Contest Winners Announced
2 commentsCreative storage solutions won the day in our annual contest.
view details
Bandsaw Box
I previously submitted a Mahogany Bandsaw Box. These are three additional boxes I made as Christmas gifts for three Granddaughters - a blonde, a brunette, and a redhead. The drawer in...
view details
Jewelry Box
1 commentLacewood & curley maple outside; inside shelves of quarter sawn spruce, cedar & curley maple. All done by hand for my future daughter-in-law
view details
Jewelry Box
3 commentsJewelry Box is made from birch. The letter "V" on both the outside and inside is my granddaughter's initial. The drawers are lined with velveteen. All the hardware is brass.
view details
_sqs.JPG)
White oak Jewelry box
Quartersawn white oak jewelry box. With musical movement. Finished with shellac.
view details
River birch and mahogany banded Jewelry Box
1 commentThis is a 12x7.5x4.5 jewelry box, made from river birch. The top handle and top edging is banded with mahogany. Purple heart pins hold together knuckle joints at each edge, while the inside is lined...
view details
Jewelry "Books"
20 commentsCollection of faux books hides a jewelry box inside. Jewelry “Books” by Russ Amos WOODS Walnut- Box, books, and drawer dividers White oak...
view details
Cedar Jewelry Box
This was a very enjoyable project. Done is a single session, it required no measuring. I drew on the wood and started cutting. The box and lid were drawn and band-sawed. Additional shaping in the...
view details
Valet box
2 commentsValet box. Case constructed of walnut. Corner joints made with Rout R Joint system Heart pattern. The doors are Brazilian Rose wood utilizing 1/8" brass pins for hinges. Louis Cube parquetry pattern...
view details
|
|
Join Woodworkers Like You
283546 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
