Become an ONLINE MEMBER and get exclusive access to articles, videos, plans, and more
showing 1 - 20 of 50 posts
1 2 3 Next >
Helped a freind build this California Curly red wood live edge coffe table, 2" thick solid billet of aluminum for the leg and a 3/8" glass lower shelf. He came up with a nice design as well as the...
Solid walnut table with maple bow tie. I made this table with all hand cut tenon and lots of chisel work for the mortise. I had never done tenon and mortis and my chisels were whack. In the process...
Box body was made from a piece of black walnut, beind the 'contractor wood' rack, collecting dust. I was pulling out the new stuff, to get to those pieces they put beind, for small project guys...
This bar height table was created using a salvaged maple counter slab. The walnut moons/stars visible on the top are through tenons used to attach the top to the base (see photo #4). The maple...
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
RYAN FLOATING WALNUT MEDIA SHELF
with HANGING DRAWER + ZEBRAWOOD INLAY
** The shelf's final dimensions are: 116"L x 12"W x 5"H
** Finish is hand-rubbed oil & wax: 5 coats of natural...
Ornamental birdhouse made with scraps from other projects, I used about 12 different hardwoods. Parrot is handpainted ceramic.
COKER CHERRY SLAB COFFEE TABLE
This is my 3nd attempt at creating a modern slab coffee table. Wanting to create a piece that combined the American Craft design style with the look of Mid Century...
THE "RICE" CHERRY SLAB COFFEE TABLE
with MAPLE BASE + MAPLE INLAY
This is my 2nd attempt at creating a live-edge slab coffee table - and my 1st attempt at doing a Nakashima-style piece, or any sort...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
Its a hall table that I'd been struggling to draw for a few weeks. I had the germ of an idea in my head but I couldn't get it nailed down on paper, but eventually it just fell out of me in 5 mins...
INSPIRATION TO BUILD THIS CABINET CAME FROM A PREVIOUS FINE WOODWORKING MAGAZINE ARTICLE DATED OCTOBER 2010. THIS CABINET WAS MADE TO PERSONAL DESIGN SPECIFICATONS AND MADE OF SAPELE...
This contemporary end table was made for our family room and is made of quarter sawn Englsh Brown Oak and Wenge. It is 12 by 21 and is 25 high. Tongue and groove joinery mates Wenge to...
This box is 7 by 7 by 4 high and is made of Canarywood. The ribbons and bows are made of Wenge, Purpleheart and Satinwood. The dots are all approx. 3/16 in thick and are made of...
I made this Modern Occasional Table for one of my wife's adult students named Ryoko.
I combined African Mahogany, Phillipine mahogany and Walnut.
Treasure Chest made from Cherry, lined with tiger maple, inlayed with black walnut and walnut doweled the legs are also Maple one piece. All mortise and tennon with 1/4 glass etched for a gift to be...
Definitely the strangest coffee table I have ever made (strangest I have ever seen actually...It was oodles of fun though)
I was asked to come up with a home library capable of holding upwards of 3500 books of varying sizes. The challange was to design the bookcases to fit into a room only 12' x 15', while leaving some...
Here is a picture of a design that started in Sketchup, then was rendered, then finally built. I did several variations of the design and actually built 6 different doors, 6 different stands, and...
Become a Better Woodworker