Become an ONLINE MEMBER and get exclusive access to articles, videos, plans, and more
showing 1 - 20 of 23 posts
1 2 Next >
After a house fire last year the coffee table I had was destroyed so I had to build myself a new one. The tiger maple used for the top reminded me of ripples in a stream and so it needed some...
This bar height table was created using a salvaged maple counter slab. The walnut moons/stars visible on the top are through tenons used to attach the top to the base (see photo #4). The maple...
Found this piece of wood in the rafters of my grandfathers garage in Washington State. Apparently he used to take his chain saw down to Alki Beach and cut up drift wood, large driftwood. Not too sure...
This Hall table called "Dark Transition" is made from Black Walnut (from Vancouver Island, B.C.), Spalted flame Maple (Vancouver Island), Ebony and Spanish Cedar.
A look at an instrument maker's standby, and some ideas for using them in furniture making
I used bamboo flooring cutoffs for this project. A router was used to cut the circles and inlay pocket. I made the circle template from plexiglass. Bamboo has a high percentage of silica and is tough...
I was commissioned to produce a set of end tables for a client and given free reign to do so. This is what I came up with. I had seen the Kane Tsugi on a few different occasions in the past several...
The primary goal of this project was to create a showpiece for the entry hall of the clients' home. It was commissioned by a local couple who requested marquetry imagery featuring...
I was walking down W. 22nd Street in Manhattan on my way to work and walked by four dumpsters filled with sheetrock scraps, 2X4's, empty joint compound buckets and a few hundred square feet of...
This is from my wine cabinet series. This piece though made for the show of The Furniture Society Conference held at Victoria, BC., Canada,
Frame is bubinga, door panels are maple...
This small, decorative side table was built for a client with minimal room who needed a table to go between two chairs but also to be put against a wall for added space. Built from Black Walnut and...
Flame Birch Top, with Black Walnut, Paduak, and Spanish Cedar “ Maple Leaves” inlays
The Base is Western Red Cedar faux finished to look like stone.
Solid Cherry Legs and top frame with ebonized white ash leg stretchers and a very quilted White Ash top inset. Ebony and Padauk “Koi” inlays.
Black Walnut Legs and Top Frame with Spalted Maple top inset and leg supports. With Black Walnut and Western Red Cedar inlays
This box is made of oak. The inlay was made from veener.
It was originaly a Chistmas perent for my girlfriend. That's all.
5-drawer jewelry box. Cherry, curly maple (love the sweep of the figure to match the leg curves), blodwood pulls inlaid with sterling silver. Hand cut dovetail drawer joinery. Shellac and oil finish...
The Pyramid is a display/storage box for a child's glass crystal ball. The box is 6/3/4" square by 5-7/8" high and has many different kinds of exotic hardwoods inlayed.
This large humidor is made from Babinga, Black Walnut, Spanish Cedar and Spalted Maple. I found the Spalted Maple on Saltspring island just off of Vancouver island in British ColumbiaThe...
Solid Walnut Dining Table for my wife.
Line inlay is red Oak. character inlay is Cherry.
Become a Better Woodworker