tag: frame and panel
showing 1 - 20 of 43 posts
1 2 3 Next >
The customer had a table in his home and told me to match it. I did. It is a duplicate of a table in Independence Hall, Philadelphia, PA. It was built for his daughter. It is made of all solid...
I developed the concept for this table after growing frustrated with our always-cluttered entrance table, which my wife had noticed was also growing a bit tired. The table combines a walnut frame...
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
Federal Style Hall Table
This table is very compact but has enough capacity to handle those entry way package and mail perch duties as well as storing car keys, bus schedules, maps or whatever...
This table is an idea of mine with much influence from other tables from the internet. All wood used is from reclaimed pallet wood, resurfaced, sanded, doweled and using lap joints put table...
This is a Black Walnut Nightstand using the Tim Roussaeu video series design. I built this one with my Festool Domino joiner for the mortise and slip tenon joints,
I used the Festool Domino joiner to cut the slip tenons for this copy of Tim's small cabinet. The piece is made from Honduras Mahogany with solid wood panels. I added a shelf supported by...
A small hall table made from salvaged Sydney blue gum and silver ash. This was designed as an exercise in dovetails. Every joint is a dovetail of some kind. The breadboard ends are sliding...
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...
This Model hapens to be half the size of my existing shop. I currently have a 24 x 40 shop/garage, but no where near the tools that I have placed in my dreamshop on here. If I ONLY had the money...
Hi im a Bee Keeper and a residential framer and i love working with wood. This is one design that came into my head year ago when i started rebuilding a horse barn that previous owners had into a...
This bistro set was made for my mother ( who loves cats ) for her new Ipe deck . It was yet another job I practiced many different types of joinery . I used spanish cedar and mahoganynbsp...
Andrew Hunter continued his exploration of Asian tools and techniques with a mind-blowing three-way miter that he cuts surprisingly simply with a mix of power and hand tools.
My wife asked me for a folding bridge table, without specific joints I decided on a foldaway table easy to dismantle.
I have built this table in French walnut and using billiard...
Tip-Top Sewing table 60" by 24" and the top tiped up it's 60" by 48'
The leg swing out to hold up the tip-up top
Made of maple plywood top, western maple and oak ply sides with walnut trim. Shellac...
This table was commissioned by the Business and Economics Department of Western Washington University in Bellingham, WA. Measuring 20 feet long by 5 feet wide by 30 inches tall, it had to be built in...
This is an end table made from Mahogany. It measures 27" high, 22" deep, and 22" wide. I also make it 16" and 20" tall. The top is from a single live edge board. There are two leg styles that I...
Save up to 52% on Fine Woodworking
Become a Better Woodworker