tag: frame and panel
showing 1 - 20 of 52 posts
1 2 3 Next >
Walnut Key cabinet. Wormy Walnut panel and QSO Shelves. The wee dolphin is carved from beech.
Custom made trimwork, armrail custom coved on table saw, all flat trim cut to best show ray flecks for visual interest against the broad grain of the panels.Bar is 43 inches high, 90 inches long. Two...
Red Oak cabinet with 3 sliding doors. 34 inches high, 8 inches deep and 82 inches long. Frame and panel doors. Panels resawn to highlight ray flecks.
Finished with Oil Varnish mix.
Solid Cherry Tripple Dresser made for my Daughter as the first piece of a bedroom set. Single timber (grain match) per row curved front dovetailed drawers.
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
In an earlier post I showed the start of this project. It has taken about six months to complete. The clock is all West Indies mahogany. The movement is an eight day cable weight driven movement. The...
Based on a similar piece at MESDA, in poplar with a red over black milk paint finish. Rat tail hinges. The upper cabinet hides a TV, the lower a stereo. Plinth base with dovetailed bracket feet...
Solid bamboo cabinet with sliding basket weave doors. Finished with Tried and True, original oil.
Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside.
Inspired from a James Krenov piece.
my first proper project and first post on here please give me your opinions. i made this for my girlfriend as a christmas present i used oak, walnut and hawthorne. thanks for looking and have a...
A desk I made to work at home. I admit it is inspired by the eight leg writing desk by Thomas Moser. I needed a smaller version and decided to build my own. I "designed" it on CAD to make sure...
My ultimate workbench-- finally finished! The bench has a tail vise, a 24" face vise, and a patternmaker's vise. Overall size is 36" x 92". The top is 4" thick laminated hard maple with a 5" bubinga...
Cherry half-sideboard. Quarter sawn sycamore is used as secondary wood for drawers. The pulls were carved from cherry crotch yielding the darker tone without using dye or stain. The crown molding...
Colonial inspired kitchen. Made of cherry with curly cherry drawer fronts. It has inset doors and drwers with mortise an tenon beaded face frames. It has a hand rubbed oil/varnish blend finish with a...
This cabinet is for a good friend of mine. He wanted to suprise his wife with a really big gift for Christmas this year. He told me they used to have a cabinet years ago but it ended up at his...
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
This piece was created using materials shaped by nature. Hand carving of leaves and the oil painting of the Au Sable River was done by Joann Post. Elements incorporated include spalted...
After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
Save up to 52% on Fine Woodworking
Become a Better Woodworker