tag: frame and panel

showing 1 - 20 of 121 posts matching dovetails [X]
1 2 3 Next > Last

Sort By:

Æteriske Box

julienhardydesign, member | May 19th, 2013

Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside. Inspired from a James Krenov piece. Made with...

view details

Cabinet inspired by Garrett Hack

cbrock85, member | May 3rd, 2013

I first came across Garrett Hack's work when I joined finewoodworking.com a couple of years ago. His small hand plane tool cabinet was something I had always wanted to build. So when my beautiful...

view details

Guest apartment

GrenadaBarefoot, member | February 3rd, 2013

We recently completed the addition of a small guest apartment and now I have been working on finishing it. We built custom mahogany cabinets for the kitchen and I have been busy making the furniture...

view details

What hand tools can't you live without?

MPekovich, member | January 30th, 201364 comments

While building a travel tool chest I had to make a hard desicion about which hand tools would make the cut. I'll tell you what I settled on, but I want to know which tools would end up in your tool chest.

view details

Scotch cabinet

brucem26, member | January 7th, 20132 comments

Fine scotch whiskey simply doesn't deserve to be crammed in a liquor cabinet along with all the others. I wanted a home for my favourites. Built of Mahogany and Red Oak, it features a "floating"...

view details

Cherry side table

dogface, member | August 21st, 2012

Cherry Side table

view details

Writing desk

dogface, member | August 17th, 2012

Writing desk for my daughter, Materials: Cherry, quilted maple and tiger striped mahogany inlay, holly and ebony banding and cuffs. Finish: Amber shellac, non-wax shellac sealer/ wipe on varnish

view details

Quilted maple Arts and Crafts Sideboard

lovewood, member | July 22nd, 20122 comments

Arts and Crafts quilted maple sideboard. The drawers are solid tiger maple and dovetail and the back is 3/4" tiger maple shiplap.

view details

Pennsylvania Spice Box

jlecomte, member | July 14th, 20122 comments

I made this Pennsylvania spice box from plans published in FW #196 by Steve Latta. I modified the feet (I did not like the original flat bracket feet and thus made ogee bracket feet) and the...

view details

Tea Cabinet

GeremyCoy, member | March 19th, 20122 comments

A cast–iron Japanese teapot inspired this chest of drawers. The teapot rests cozily in the central cubby, while small teacups perch overhead in smaller ones. Drawers below hold necessary...

view details

Shaker chimney cupboard questions?

MPekovich, member | February 22nd, 201212 comments

If you have any questions about the recent Shaker chimney cupboard video workshop, post them here and I'll be happy to answer them.

view details

Dovetailed hall table

accentcreate, member | February 12th, 20122 comments

A small hall table made from salvaged Sydney blue gum and silver ash. This was designed as an exercise in dovetails. Every joint is a dovetail of some kind. The breadboard ends are sliding...

view details

Dream Workbench

JonJLLJC, member | January 26th, 201270 comments

My ultimate workbench-- finally finished! The bench has a tail vise, a 24" face vise, and a patternmaker's vise. Overall size is 36" x 92". The top is 4" thick laminated hard maple with a 5" bubinga...

view details

cherry half sideboard

MKetelsen, member | January 15th, 20122 comments

Cherry half-sideboard. Quarter sawn sycamore is used as secondary wood for drawers. The pulls were carved from cherry crotch yielding the darker tone without using dye or stain. The crown molding...

view details

Colonial style kitchen

byrd1, member | January 8th, 20124 comments

Colonial inspired kitchen. Made of cherry with curly cherry drawer fronts. It has inset doors and drwers with mortise an tenon beaded face frames. It has a hand rubbed oil/varnish blend finish with a...

view details

gab furniture & woodworks shop

gabfurniture, member | December 9th, 20112 comments

this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...

view details

Shaker Inspired Nightstands

davknecht, member | October 25th, 20112 comments

This is my first real woodworking project! The stands are made out of cherry, the drawer sides are poplar and the drawer runners are maple. The base corners are hand cut mitered...

view details

tenshotelk

tenshotelk, member | October 20th, 2011

timber and frame workshop, will have windows and doors with lots of natural light but have trouble doing with this program, computer challenged. will also have radiant in floor heat and wood...

view details

I wish!

Dthirsh, member | October 19th, 2011

Open floor plan with plenty of windows for natural light and open feel. Bathroom and drafting/sharpening/tool maintenance room. 16' garage door for easy access to shop, and easily accesable wood...

view details

Madrone Dining Sideboard

Joe Scannell, member | October 19th, 20111 comment

Madrone sideboard, designed using cardboard mockups and SketchUp. Built from a madrone tree I cut & dried 25+ years ago. Side panels are figured maple; antique glass doors. Interior is birch...

view details

showing 1 - 20 of 121 posts
1 2 3 Next > Last