tag: frame and panel
showing 1 - 20 of 35 posts
1 2 Next >
When my wife retired from teaching and started her 'volunteer career', she attempted to move herself and her stuff into my office space which is already too small. I run four businesses from there...
I finished my G&G Desk recently. I filmed the entire build and you can watch parts 1-5 below. Part 6 will be released this Friday. Please subscribe on YouTube and watch for it!
Two students receive the OAS Future Craftsmen Scholarship.
This was my first Jefferson Writing Desk and major dovetail project. I think I did okay.
Writing desk for my daughter,
Materials: Cherry, quilted maple and tiger striped mahogany inlay, holly and ebony banding and cuffs.
Finish: Amber shellac, non-wax shellac sealer/ wipe on varnish
Modeled after a Gustav Stickley writing desk (ca. 1900). Quarter sawn white oak with mission brown trans fast dye and Tried and True varnish oil. The desk is 12 1/4" deep by 26 1/2" wide by 54 14"...
A desk I made to work at home. I admit it is inspired by the eight leg writing desk by Thomas Moser. I needed a smaller version and decided to build my own. I "designed" it on CAD to make sure...
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
My wife wanted a small but functional desk for our downsized retirement home. Having seen an antique Davenport or Captain's Desk she asked me to design one that would be functional for a home office...
My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...
This Model hapens to be half the size of my existing shop. I currently have a 24 x 40 shop/garage, but no where near the tools that I have placed in my dreamshop on here. If I ONLY had the money...
This is a project I just completed and installed. All the cabinets are solid West Indies mahogany, all cabinet door pairs have book matched panels, all drawers have dovetail joints, All cabinet...
For my wife's 50th birthday in 2007 I made her a seven drawer roll top desk from quarter sawn red oak. All of the dove tails were hand cut. Sides are soft maple. Plan was adapted...
Light Figure Tiger Maple Butterfly Tavern Table. Stained with aniline Dye, Shellac, and top coat of wax.
One of pair of old-school desktop organziers. Part of a rear desk unit built in to a full floor matching home office in Brookline Ma. Cherry with padauk accents, hand-rubbed oil and wax finish...
Header of the rear desk recessed into the rafters of the mansard. Built in to a full floor matching home office in Brookline Ma. Cherry, hand-rubbed oil and wax finish. Design contends with a trilvl...
I design this desk for my iMac which is too high when standing on a regular desk. Imac screen is slightly at the level and also outside the desk on a independant foot. This give very confortable use...
Save up to 51% on Fine Woodworking
Become a Better Woodworker