tag: frame and panel
showing 1 - 20 of 43 posts
1 2 3 Next >
This project took nearly 2-1/2 years of Sundays to complete. Luckily it was commissioned by my (still) very close friends, so their patience and collaboration was unlimited. This is my first builtin...
This is a large dining room buffet built as a companion piece to a large Japanese tansu step-chest that I built for the same client. Both are 100% African sapele, finished with Minwax red mahogany...
Dovetailed birch cabinet with marquetry panel. Some of the woods I used are manzanita, walnut burl, rosewood, and anigre.
The table design is a modified version of the Tim Rousseau hall table. The table top is Claro Walnut. The legs and frame were made from Eastern Walnut. The dimensions are 61" long by 35-1/2" wide by...
This is a small cabinet made of hard maple. The two doors on the left are sliding doors, and the one on the right is hinged. The slats in the door frames are concave, planed with a round bottom...
This piece started out as a small cabinet for my wife's office while also helping me build my portfolio. I wanted a small case that would lend itselft to small production runs while still being...
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
Solid bamboo cabinet with sliding basket weave doors. Finished with Tried and True, original oil.
I like sliding doors and lids, partly because I get to make this nice handle in one simple step on the tablesaw.
We recently completed the addition of a small guest apartment and now I have been working on finishing it. We built custom mahogany cabinets for the kitchen and I have been busy making the furniture...
Made from clear cedar with house wrap for light panels and LED lighting for low power consumption ,finished with spar varnish .
Installed on a post made from spruce and finished in dark brown paint .
A cast–iron Japanese teapot inspired this chest of drawers. The teapot rests cozily in the central cubby, while small teacups perch overhead in smaller ones. Drawers below hold necessary...
Madrone sideboard, designed using cardboard mockups and SketchUp. Built from a madrone tree I cut & dried 25+ years ago. Side panels are figured maple; antique glass doors. Interior is birch...
Tansu style cabinet, lower cabinet is post and rail construction: upper is solid carcass with sliding dovetails. Mahogany and maple, bubinga accents. Doors are bridle joints pinned with pyramidal...
Name: Don Riley, Lt. Col. USAF Retired
Address: 217 Curtis Boulevard, Marietta, Ohio, 45750-2218
Daytime telephone number: nbsp740...
Description: Style: Asian-inspired, Type: Display-China Cabinet.
Materials: Red Oak, Red Oak plywood, Poplar, Birch plywood, matte black hammered...
This is an end table made from Mahogany. It measures 27" high, 22" deep, and 22" wide. I also make it 16" and 20" tall. The top is from a single live edge board. There are two leg styles that I...
This maple spice cabinet was made for an gallery and it is currently on display there awaiting a happy buyer!
It is made of of hard maple 1/4 inch ply for the door front. I managed to get some...
The Asian influence is complimented by the use of five different fall-off (scrap) woods...kind of a wood five-spice concoction. The top, bottom and divider of the carcass are reclaimed...
I was commissioned to produce a set of end tables for a client and given free reign to do so. This is what I came up with. I had seen the Kane Tsugi on a few different occasions in the past several...
Save up to 51% on Fine Woodworking
Become a Better Woodworker