showing 1 - 20 of 113 posts
frame and panel
1 2 3 Next > Last
THE ADJUSTABLE CHEST By: Jim Richards
In 1970, at our first house located in Saugerties, NY, seven black cherry trees in the front yard had been struck...
This media cabinet was commissioned by my "day job" employer to live in our Corporate Board Room. The dimensions constrained the cabinet to fit between a support column and a wall and needed to be...
Nightstand in a style that is partly Asian and partly Greene and Greene. The arched breadboard ends and arched rail are reminiscent of the gate to Shinto temples, thus the name Torii. Made of hand...
The built-in chimney cabinet is of my own design, with brass hardware and made of North American cherry, finished with an oil/varnish rubbed on finish. It was constructed with an integral fireplace...
Cherry book case with black beading and glass doors. All joinery pocket holes. Frame and panel construction. Shop made molding. Key challange was how to join very tall (56 inch), 3/4 inch thick...
this maple burl & cherry cabinet is 15" deepx 24" wide 36" tall
and is finished in shellac to see more of my work visit www.Andersonwoodwork.net
I finished my G&G Desk recently. I filmed the entire build and you can watch parts 1-5 below. Part 6 will be released this Friday. Please subscribe on YouTube and watch for it!
Using string and wooden blocks to clamp miters makes it easy to align corners too- unlike traditional clamps.
Sewing Centers / cabinets available for retail purchase tend to be large fold-out and fold-open units using mostly man-made materials and mass production joinery. After consultation with my local...
Hi, Here is my first attempt at using hardwood in a furniture project. It is made of cherry, with baltic birch for the drawers. I decided to use soft closing drawer slides because of personal...
This was my first Jefferson Writing Desk and major dovetail project. I think I did okay.
I decided to make better use of the 10-foot celings in my shop and eliminate several rolling carts taking up valuable floor space. I added cabinets above my work bench, trimmed out the windows to...
A little cabinet to store shoes in a small entrance way.
This piece started out as a small cabinet for my wife's office while also helping me build my portfolio. I wanted a small case that would lend itselft to small production runs while still being...
The customer had a table in his home and told me to match it. I did. It is a duplicate of a table in Independence Hall, Philadelphia, PA. It was built for his daughter. It is made of all solid...
A modified Matt Berger design. quarter sawn spalted maple with cherry panels. Used Freud door rail and stile bits for head/foot board. Also used Freud raised panel bit for panels. Finish with...
Solid Cherry Tripple Dresser made for my Daughter as the first piece of a bedroom set. Single timber (grain match) per row curved front dovetailed drawers.
155 gal. bow front salt water aquarium stand
This project took forever to build.
It all started when a neighbor asked me to install a bay window for them. He had his own aquarium business, like that...
Save up to 51% on Fine Woodworking
Become a Better Woodworker