tag: cherry

showing 1 - 20 of 1000 posts
1 2 3 Next > Last

Sort By:

Shaker No. 3 dining chair

Chuck_Griffith, member | April 21st, 20131 comment

Shaker chairs ranged in size from 0 to 7, so the No. 3 is at the small end of the scale. However, it makes for a fine dining chair, especially if the room and table are relatively small too. For...

view details

Hall Mirror and Coat Rack

iowadave, member | April 21st, 2013

Mirror and coat racks were made from cherry. The design comes from Woodsmith magazine. All moldings were made my hand. I added the side coat racks.

view details

Shaker Round Stands

neobassman, member | March 29th, 20131 comment

I have always admired this timeless, classic, Shaker stand. While the design dates from the early 1800's, it still looks very contemporary. These are near-reproductions of the original now...

view details

This project for our guest room is based on tradiational Shaker beds but is my own interpretation. Turning the cherry posts was great fun and used the absolute maximum length of my Delta midi lathe...

view details

Cherry Burl Bowl

CowboyKenny, member | March 25th, 2013

Bowl carved using an Arbortech carving wheel on a grinder. Finish up with sanding disks then curved scrapers. Watco Salad Bowl finish.

view details

Furniture

Dustymid, member | March 16th, 2013

Dutch Pie Table is an old idea for a piece of furniture to have multiple uses; a round, half round or quarter round table with the remainder sections as shelves. Use it as storage shelves , then at...

view details

Cherry Shaker Sofa Table

cop154, member | March 15th, 2013

American Cherry sofa table in the Shaker style. Front edge has a slight radius (1" over length). Construction is mortise and haunched tenons. Finish is 2 coats BLO, 4 coats of garnet shellac (1 lb...

view details

Dragon Process - 4 slides

Pontic, member | March 15th, 20131 comment

Sixteen foot column made with 3/4" Solid Cherry with lock-mitered joints. Dragon made with 2" Solid Cherry stock. Mounted starting 7 feet off the floor. Dragon is 78 inches long.

view details

Cherry TV Stand

GarageWoodworks, member | March 6th, 20133 comments

Cherry with tiger maple drawer fronts. The sides of the drawers are the sides of the stand. SketchUp file (doesn't include joinery or drawer slides and other minor details) can be found hereWatch...

view details

Cutting Bench Makes it easy to convert fresh-cut logs into turning blanks

JoeLarese, member | March 6th, 20135 comments

Use this bench and a chainsaw to make bowl and spindle blanks for woodturning.

view details

Shaker counter stools

Chuck_Griffith, member | March 4th, 20131 comment

I'd be embarrassed to tell you how little I charged for these. I figure they're pretty simple, so don't overdo it. However, because of the way I position holes for the rails and stretchers, the legs...

view details

9 drawer Figured Cherry/Hard Maple Dresser

sjama6678, member | February 18th, 2013

Took me a while to complete…in between other jobs… from milling the lumber to the final coat of wax, it was a very satisfying project. Solid wood throughout, except side panels (1/4" Maple Ply...

view details

Asian and Greene and Greene inspired hall table

NikBrown, member | February 17th, 20135 comments

I've been fairly active in the online woodworking community for a couple years but have never really produced anything I would classify as furniture. I began working on this table about 7 months ago...

view details

pennsylvania cherry table

PaulMelniczak, member | February 6th, 2013

This cherry table has maple inlays and ash stringing, all from Carlisle, PA. The curved drawer fronts are rip sawn and laminated. The finish is linseed. This was my first project of this sizeso...

view details

Simple dovetailed box

jlecomte, member | January 20th, 2013

Simple dovetailed box - cherry and fiddleback maple.

view details

Giving Tree

ThunderHunter34, member | January 9th, 2013

This bandsaw box was a gift to my youngest daughter to store her treasures. It is made from a cherry tree in our backyard that came down in the wind. Most of the tree wound up as fire wood but I...

view details

Miniature No. 0 Shaker rocker

Chuck_Griffith, member | January 8th, 20131 comment

I make full-sized Shaker chairs. My wife collects miniature chairs. So for Christmas this year I figured a shrunken Shaker piece might do the trick. The result is an exact "half-size" version of the...

view details

End Grain Hollowing Project: Turning an Egg Cup

JoeLarese, member | January 7th, 20132 comments

Turning an egg cup is an excellent project for developing foundation skills in spindle turning and end-grain hollowing.

view details

Shaker blanket Chest

Chuck_Griffith, member | January 3rd, 20131 comment

Shaker blanket chests usually have a flat top and one or two drawers that pull out from the wide side, so this one is a little different. The arched top was made by coopering slats of cherry whose...

view details