tag: chair

showing 1 - 20 of 37 posts matching cherry [X]
1 2 Next >

Sort By:

Shaker No. 3 dining chair

Chuck_Griffith, member | April 21st, 20131 comment

Shaker chairs ranged in size from 0 to 7, so the No. 3 is at the small end of the scale. However, it makes for a fine dining chair, especially if the room and table are relatively small too. For...

view details

Shaker counter stools

Chuck_Griffith, member | March 4th, 20131 comment

I'd be embarrassed to tell you how little I charged for these. I figure they're pretty simple, so don't overdo it. However, because of the way I position holes for the rails and stretchers, the legs...

view details

Miniature No. 0 Shaker rocker

Chuck_Griffith, member | January 8th, 20131 comment

I make full-sized Shaker chairs. My wife collects miniature chairs. So for Christmas this year I figured a shrunken Shaker piece might do the trick. The result is an exact "half-size" version of the...

view details

'Rocking Chair'

Mike_McCarthy, member | August 13th, 2012

This is a rocking chair I designed and constructed for my mums 65th birthday. Curved Lamination was relatively new to me. I have always been a firm believer in heavy strong and durable pieces of...

view details

Sculpted Cherry Bar Stools

Canadian_Woodworks, member | July 31st, 20123 comments

A beautiful yet comfortable bar stool designed and built to last generations. With its hand sculpted seat and great lumbar support you'll never want to get up. Shown in Canadian Cherry approximately...

view details

Arts and Crafts Dining Chairs

Turbochief, member | December 12th, 20117 comments

The dining chairs were built from a Kevin Rodel plan published in FWW and available from Taunton. The chairs are solid cherry with some wenge Greene and Greene style accents. The upholstery is 2...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Greg Stewart's unorthodox Scottish shop.

Gregs83, member | July 20th, 2011

A very unorthodox setup for a shop none the less apart from hand tools its kind of workable in a h&s contravening haphazard way!A place to escape and create.

view details

1/12 Scale Queen Anne Chair

Elga, member | May 21st, 2011

I am a furniture maker with a difference, I make it in 1/12 scale for dollhouses. For these chairs I used the plan from the book Queen Anne Furniture, History, Design and Construction written by...

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

Chair Brings in Some Pretty Big Bucks

BetsyE, member | April 9th, 2011

I recently offered “Making Ladder Back Chairs with Russ Filbeck” in one of my book giveaways. So when I saw the news of a recent charity auction where Russ sold one of his chairs, I was...

view details

Dining room table and chairs.

littledempsey, member | March 18th, 2011

Cherry dining table with Padauk accents, this table has two leafs. Chairs were commissioned after the table was built. I sprayed the top with finish and it looked great, but I thought it would look...

view details

Cherry Dining Chair Tapered Bent Lamination

AJ_PA, member | December 28th, 2010

Cherry Dining room chair with leather seat. Tapered bent lamination back legs and back slats. Finished with 4 coats of wipe-on poly. 1 of 6.

view details

"K" Chair #2

AZChip, member | December 12th, 2010

Second chair made using the "Mobius Lamination" technique developed for the "Maple Build-Off" competition.

view details

"K" Occasional Chair

AZChip, member | December 12th, 2010

Detail showing triangulation

view details

The Heflin Bar Stool

RockingChair, member | November 19th, 20101 comment

A good bar stool with a back is more than a tall chair. We discovered that the height places greater demand on the proportions and balance, that supporting your feet challanges the structure...

view details

Shaker work in gallery show

Chuck_Griffith, member | November 16th, 20101 comment

On Saturday, 13 November 10, I had my first opening at an art gallery. I had six weeks notice to start making stuff, but my workshop was being totally remodeled, so that really meant just 3 1/2 weeks to...

view details

Butterfly Tavern Table

PineHillPrimitives, member | May 7th, 2010

Light Figure Tiger Maple Butterfly Tavern Table. Stained with aniline Dye, Shellac, and top coat of wax.

view details

Child's Desk Chair

Jurgen01, member | January 6th, 20101 comment

Proportioned for a child, this chair was made to go with a drop-front desk posted elsewhere in this gallery. Both the desk and chair were gifts to my then 5-year-old granddaughter. Built...

view details

No. 0 Shaker Rocker

Chuck_Griffith, member | January 5th, 20103 comments

My sister has knitted several Christmas stockings for us, so I thought she deserved something nice in return. This is a pretty faithful reproduction of a Shaker No. 0 armed rocker, sized for kids or...

view details

showing 1 - 20 of 37 posts
1 2 Next >