tag: cabinet


showing 1 - 20 of 50 posts matching shellac [X]
 1 2 3 Next > 
Sort By:


Subscribe to RSS feed
small cherry cabinet

small cherry cabinet

this maple burl & cherry cabinet is 15" deepx 24" wide 36" tall  and is finished in shellac to see more of my work visit www.Andersonwoodwork.net

view details
Cherry Kitchen Cabinets using Kreg Jig

Cherry Kitchen Cabinets using Kreg Jig

Cherry finished with Boiled Linseed Oil, 2 coats Dark GARNET Shellac and 3 ooats Polyuretane. Photo 3 is a sideboard located in the Dining Room. I used a Kreg Jig and used pocket hole construction.

view details
Contemporary Tool Cabinet

Contemporary Tool Cabinet

2 comments

This tool cabinet was inspired by Mark Laub's work. It is made from birdseye maple and mahogany. All the dovetails were hand cut and so were the tennons. Finished with Shellac 44"H x 55" W x 14" D.

view details
Oak TV Stand

Oak TV Stand

1 comment

I made the TV cabinet from Red Oak. I cut the raised panels for the doors on the tablesaw. I also turned the bun feet on the lathe. The finish is shellac and satin poly. There is also a 6 inch deep...

view details
Kitchen complete remodel - Pacific Big Leaf Maple (curly or quilted maple)

Kitchen complete remodel - Pacific Big Leaf Maple (curly or quilted maple)

A year and half ago my best friend, Vickie Hilliard and I demolished my kitchen and have rebuilt it with this gorgeous solid curly maple over baltic birch cabinets.  It includes a break front look...

view details
Chimney Cupboard

Chimney Cupboard

my version of a chimney cupboard from a recent FWW article

view details
Cabinet inspired by Garrett Hack

Cabinet inspired by Garrett Hack

I first came across Garrett Hack's work when I joined finewoodworking.com a couple of years ago. His small hand plane tool cabinet was something I had always wanted to build. So when my beautiful...

view details
Krenov cabinet

Krenov cabinet

I have always wanted to build a Krenov Cabinet and the chance came to build a new display cabinet. It is made of curly maple which was tricky to work with. I followed the article in FWW208...

view details
Curved Cabinet-on-Stand

Curved Cabinet-on-Stand

1 comment

Woodworker: Nicholas NelsonWinner of Best in Show, this curved cabinet was inspired by the coastal scenery of British Columbia. Nelson said he designed it to convey a sense of motion. The cabinet 13...

view details
Spalted Maple and jatoba Hall  Table

Spalted Maple and jatoba Hall Table

Spalted Maple and jatoba 40-1/2 inch x 16-1/2 inch x 31 inch tall with a shellac finnish built by Anderson Woodworks Olympia wa

view details
Armoire

Armoire

My daughter, wanting a unique clothing storage cabinet, asked for and I responded designing and making this Armoire. The Armoire was fabricated uing 4/4 quartersawn white oak structure with 1/4" oak...

view details
Chiffonier in Elm Burl veneer

Chiffonier in Elm Burl veneer

3 comments

Chiffonier in elm burl veneer loosely based on a Ruhlmann original. Finish is French polish with a garnet shellac. I left the aspen interior polished but without a finish. This way it should attract...

view details
Fantasy Shop

Fantasy Shop

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc.  I have to raise the heights of some of the equipment to...

view details
Daves Workshop

Dave's Workshop

1 comment

After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...

view details
Jewerly Amoire

Jewerly Amoire

1 comment

7 drawer amoire, made of Cherry with Maple drawer interiors.  Firsts:  dove tails, panel doors and case with that many drawers.  I am an amatur, I design computer systems for a...

view details
Greg Stewarts unorthodox Scottish shop.

Greg Stewart's unorthodox Scottish shop.

A very unorthodox setup for a shop none the less apart from hand tools its kind of workable in a h&s contravening haphazard way!A place to escape and create.   

view details
Cherry Armoire

Cherry Armoire

4 comments

This is an armoire I built for my daughter.  I started with plans that called for it being made from plywood, and there was no decorative top.  I redesigned it so all the joints moved for...

view details
Robbies Woodshop

Robbie's Woodshop

I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.

view details
Bonnet Top Highboys

Bonnet Top Highboys

4 comments

Several of you members wanted to see a better view of these 2 highboys I finished for my wife this past April.  Making them at the same time was a big time savings. All together, they took about...

view details
Ruhlmann-style chiffonnier

Ruhlmann-style chiffonnier

8 comments

This chiffonnier is similar to one by Ruhlmann in the Brooklyn Museum. My primary changes: using pommele sapele veneer with maple inlay, deepening the cabinet, and using magnetic catches.

view details
showing 1 - 20 of 50 posts
 1 2 3 Next > 

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

363151 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

geconil geconil
joined Dec 20
larryford1 larryford1
joined Dec 20
user-2337541 user-2337541
joined Dec 8

saragoodwin saragoodwin
joined Dec 18
wworker2 wworker2
joined May 11
markmech2002 markmech2002
joined Oct 30


Create your profile now!