tag: cabinet

showing 1 - 20 of 40 posts matching poplar [X]
1 2 Next >

Sort By:

Chest drawer for a young lady. (Cajonero para una joven dama)

rsantos, member | March 16th, 20131 comment

Drawings,measures, and assembly process by Rsantos Art Decor kitsch style drawer chest is made using MDF, and melaminic particle boards. Jointning system is "pocket hole", using self taping, washer...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Tool Cabinet

Antondeg, member | July 24th, 20112 comments

After buying a new set of Narex chisels I decided I needed a nice tool cabinet. So I set out to make one. I then re-read Tolpin's tool cabinet book and decided on a plan. So here is my tool cabinet...

view details

Mark's Garage Shop

mflick14, member | June 30th, 2011

This is a basic garage workshop that I would like to have in my garage. I have some of the items currently in my garage/shop and will hopefully be able to add more soon.

view details

Robbie's Woodshop

Robbie2527, member | June 18th, 2011

I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.

view details

Bonnet Top Highboys

rogerlandry, member | June 10th, 20114 comments

Several of you members wanted to see a better view of these 2 highboys I finished for my wife this past April. Making them at the same time was a big time savings. All together, they took about...

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

Twin Bonnet Tops

rogerlandry, member | April 15th, 20117 comments

As a woodworking hobbyist in my spare time, I had always wanted to make the highboys in FWW issue #117 from 1996. With the work and detail involved, I figured it would be just as frustrating if...

view details

Shaker chimney cupboard

Chuck_Griffith, member | November 16th, 20102 comments

This cupboard was built for the gallery show posted earlier. Made primarily of cherry with milk-painted poplar for the seven shelves and back. The poplar was used both to lower the cost and to make...

view details

Cherry linen press/ Entertainment center

byrd1, member | October 14th, 20101 comment

Cherry linen press. Frame and panel construction with mortise and tenon joinery. It has graduated drawers with hand cut dovetails front and back. Turned feet and all mortise and tenons are pegged...

view details

Butterfly Tavern Table

PineHillPrimitives, member | May 7th, 2010

Light Figure Tiger Maple Butterfly Tavern Table. Stained with aniline Dye, Shellac, and top coat of wax.

view details

Massachusetts Flat Top Highboy

PineHillPrimitives, member | May 1st, 201013 comments

I made this Tiger Maple Highboy after seeing one made from about 1750. This version has over 195 handcut dovetails, all solid wood drawer sides and bottoms, and 2 hidden drawers. The crown molding I...

view details

Slant Lid Secretary and Thomas Jefferson Swivel Windsor Chair

PineHillPrimitives, member | April 29th, 20103 comments

Made out of Tiger maple this secretary is a reproduction piece of one from the 18th century. It is finished with aniline dye Shellac, Glaze and a wax topcoat. The Jefferson Swivel is a replica of the...

view details

Built-in Buildoff Update

epirnik, member | February 18th, 201011 comments

As we near the finish line in our mudroom buildoff between woodworker and carpenter, the differences in working methods are becoming more and more apparent.

view details

Cottage Microwave Cabinet

SandyPondFisher, member | February 12th, 2010

Cabinet base framed with poplar, doors are wainscot framed with poplar. Cherry top. Hardware obtained from Rockler.com

view details

Dart Board

markcpreston, member | February 5th, 2010

I couldn't find a Dart Board Cabinet that I liked, so I designed my own. Made of Poplar finished with oil based stain and distressed paint. Several glazes were added to age the appearance. The celtic...

view details

wall Cabinet

Wyler, member | February 1st, 20106 comments

Wall Cabinet, Maple,poplar, paint, lacquer.

view details

Quilted Maze

slhstang, member | December 30th, 20092 comments

This countertop is for an 8 foot long cabinet in my home office. This project took 14 months to complete. I used mostly 1/4" square dowels of Poplar and Oak, with 1/4" Scant in both Oak and Poplar...

view details

Colonial Tool Cupboard

GraemeSmith, member | July 31st, 20091 comment

I felt in need of some practice to "tune-up" my hand tool skills. My planes were living in an old dresser - a constant pest to have to get in and out the old worn drawers and their protective...

view details

Modern Stacking Bookshelves

protool, member | June 30th, 20094 comments

The construction is a 3D torsion box in that each wall is a separate MDF torsion box joined at the corners by half-lap joints. Then the frame was skinned with 1/4" Birch Playwood. Finally, I built...

view details

showing 1 - 20 of 40 posts
1 2 Next >