tag: cabinet

showing 1 - 20 of 43 posts matching period interpretation [X]
1 2 3 Next >

Sort By:

Bindemiddel Filing Cabinet

julienhardydesign, member | May 20th, 2013

Filing cabinet of curly Birch, Black Walnut and laminated Birch.Dovetailed case, wedged through-tenon and mortise, and open slot mortise base.French lacquer and Tung oil finish. Made with...

view details

Burl Walnut Side Table

SFWoodworks, member | June 20th, 20121 comment

Top is edged with solid walnut, framing maple/ebony string inlay and bookmatched walnut burl veneers. The back and side panels are also veneered in burl. Pull on the door is turned ebony. Finished...

view details

The interior of this wall unit is constructed of maple plywood veneer in bleached ash veneer. The exterior is the same veneer but with a X or diamond pattern centered on each of the two large doors...

view details

Cherry and Maple Wall Unit

fat418, member | April 2nd, 2012

The cherry inlay is 1/2" wide, running in a herring bone grain direction, mitered at the corners and 1/16" in depth below the surface of all of the maple doors and panels. The photo in the closed...

view details

Walnut Bathroom

fat418, member | March 27th, 2012

Built in 1986, these vanities were made using number, sequenced walnut veneer. The counter top edge trim, back splash, light fixture moldings and crown were all made from solid walnut.

view details

Wenge Closets

fat418, member | March 27th, 2012

This job was built in 1985. All of the woodwork shown in these photos was constructed using solid wenge only, no veneer. In the case of where veneer was needed I had resawn the solid planks of wenge...

view details

Colonial style kitchen

byrd1, member | January 8th, 20124 comments

Colonial inspired kitchen. Made of cherry with curly cherry drawer fronts. It has inset doors and drwers with mortise an tenon beaded face frames. It has a hand rubbed oil/varnish blend finish with a...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Shane's Backyard Workshop

shanekelvey, member | July 14th, 2011

This blueprint consists of a overall close to perfect workshop. As you can see I laid out all of my machines and materials in a orderly fashion in a letter C shape. Starting at the bottom you pick...

view details

Robbie's Woodshop

Robbie2527, member | June 18th, 2011

I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.

view details

Bonnet Top Highboys

rogerlandry, member | June 10th, 20114 comments

Several of you members wanted to see a better view of these 2 highboys I finished for my wife this past April. Making them at the same time was a big time savings. All together, they took about...

view details

Vitrina

YOUNGNICK, member | May 11th, 20111 comment

This display cabinet is made from solid maple solid ebony and bird's eye maple veneer for the doors and drawer front. There are glass shelves inside for a collection of venetian wine glasses, and...

view details

Evolving a Design in SketchUp

Killenwood, member | April 18th, 20116 comments

When beginning a new design, I plan on saving several SketchUp versions as the project develops. I will start with a "1" after the filename, and continue with "2, 3, 4, 5…. etc." when changing...

view details

Twin Bonnet Tops

rogerlandry, member | April 15th, 20117 comments

As a woodworking hobbyist in my spare time, I had always wanted to make the highboys in FWW issue #117 from 1996. With the work and detail involved, I figured it would be just as frustrating if...

view details

Armoire

Scott_Reitman, member | May 13th, 20102 comments

This is an armoire made in 2002 when Eddie Cannono worked for me. The front door panels were from a single board that was split and bookmatched. Shellac finish. Imported hardware. To view larger...

view details

Butterfly Tavern Table

PineHillPrimitives, member | May 7th, 2010

Light Figure Tiger Maple Butterfly Tavern Table. Stained with aniline Dye, Shellac, and top coat of wax.

view details

Massachusetts Flat Top Highboy

PineHillPrimitives, member | May 1st, 201013 comments

I made this Tiger Maple Highboy after seeing one made from about 1750. This version has over 195 handcut dovetails, all solid wood drawer sides and bottoms, and 2 hidden drawers. The crown molding I...

view details

Slant Lid Secretary and Thomas Jefferson Swivel Windsor Chair

PineHillPrimitives, member | April 29th, 20103 comments

Made out of Tiger maple this secretary is a reproduction piece of one from the 18th century. It is finished with aniline dye Shellac, Glaze and a wax topcoat. The Jefferson Swivel is a replica of the...

view details

Built-In Cherry Office - Baby Huntboard

jalambert, member | April 19th, 2010

Tabletop baby huntboard for all those little things that get lost during the busy workday. A part of a larger rear desk of a full floor matching home office in Brookline Ma. Cherry handrubber...

view details

Built-in Cherry Office - Desktop Organizers

jalambert, member | April 19th, 2010

One of pair of old-school desktop organziers. Part of a rear desk unit built in to a full floor matching home office in Brookline Ma. Cherry with padauk accents, hand-rubbed oil and wax finish...

view details

showing 1 - 20 of 43 posts
1 2 3 Next >