showing 1 - 20 of 169 posts
frame and panel
1 2 3 Next > Last
I started this project with a small picture. I used all reclaimed lumber. Complete with sliding dovetail joints. The panel for the door is raised as it would have been from the time period. I found a...
Sewing Centers / cabinets available for retail purchase tend to be large fold-out and fold-open units using mostly man-made materials and mass production joinery. After consultation with my local...
Small cabinet with mini-orb corrugated steel panels. Made from recycled oregon.
I decided to make better use of the 10-foot celings in my shop and eliminate several rolling carts taking up valuable floor space. I added cabinets above my work bench, trimmed out the windows to...
My daughter wanted a "chunky" oak sideboard and display cabinet for her dining room in oak so Dad was set to work. This is the result.
A little cabinet to store shoes in a small entrance way.
I made the TV cabinet from Red Oak. I cut the raised panels for the doors on the tablesaw. I also turned the bun feet on the lathe. The finish is shellac and satin poly. There is also a 6 inch deep...
Walnut Key cabinet. Wormy Walnut panel and QSO Shelves. The wee dolphin is carved from beech.
Red Oak cabinet with 3 sliding doors. 34 inches high, 8 inches deep and 82 inches long. Frame and panel doors. Panels resawn to highlight ray flecks.
Finished with Oil Varnish mix.
This is a small cabinet made of hard maple. The two doors on the left are sliding doors, and the one on the right is hinged. The slats in the door frames are concave, planed with a round bottom...
This piece started out as a small cabinet for my wife's office while also helping me build my portfolio. I wanted a small case that would lend itselft to small production runs while still being...
I recently purchased a new Incra LS Positioner and it would not fit my old router table so I took the opportunity to build a new router table with plenty of storage, mobility, dust collection and...
This bedroom clothing armoire was constructed as a stacked two piece upper cabinet and lower dresser unit assembly for ease of cross country shipment. It is medium sized for an armoire with basic...
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
Cupboard is made of poplar, I managed to find some that was quite a bit harder than usual. Dimensions are 75" tall, 18" wide, 12" deep. Doors are joined with bridle joints, to me the best way to...
Based on a similar piece at MESDA, in poplar with a red over black milk paint finish. Rat tail hinges. The upper cabinet hides a TV, the lower a stereo. Plinth base with dovetailed bracket feet...
Solid bamboo cabinet with sliding basket weave doors. Finished with Tried and True, original oil.
I first came across Garrett Hack's work when I joined finewoodworking.com a couple of years ago. His small hand plane tool cabinet was something I had always wanted to build. So when my beautiful...
Jewelry Cabinet – Krenov Style
Starting with the classic James Krenov Display Cabinet, I modified the design to be wall hung and replaced the glass doors with solid panels. The usual display...
Save up to 51% on Fine Woodworking
Become a Better Woodworker