tag: cabinet

showing 1 - 20 of 49 posts matching chest [X]
1 2 3 Next >

Sort By:

Chest drawer for a young lady. (Cajonero para una joven dama)

rsantos, member | March 16th, 20131 comment

Drawings,measures, and assembly process by Rsantos Art Decor kitsch style drawer chest is made using MDF, and melaminic particle boards. Jointning system is "pocket hole", using self taping, washer...

view details

scale models

woodtoes, member | February 26th, 2013

Over the years, and after many attempts to produce accurate drawings, either by computer or on drafting board I have become more dependant on scale models. One of the best reasons I have foundfor...

view details

Reed Tansu

woodtoes, member | February 26th, 2013

Commissioned in 2012 by client for private residence in Maryland. Although initial inspiration came from more traditional Tansu cabinets, some would say I have used the term incorrectly, I retained...

view details

Handmade Dovetail Box

C_Conneely, member | November 9th, 20123 comments

This is a Handmade Dovetail box made from beech with marquerty on lid. It is currently on show in Farmleigh House in Pheonix Park in Dublin Ireland which is a huge achievement. I made it while in...

view details

Small Mission Style Buffet and Hutch

garyzim, member | September 8th, 20122 comments

Small buffet and hutch made with QSWO. 33"X34"X16" deep for the buffet and 33"X43"X13" deep for the hutch. It was made to relpace a metal bakers rack in our kitchen, thus the narrow width of the...

view details

cherry half sideboard

MKetelsen, member | January 15th, 20122 comments

Cherry half-sideboard. Quarter sawn sycamore is used as secondary wood for drawers. The pulls were carved from cherry crotch yielding the darker tone without using dye or stain. The crown molding...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Tool companies shower awards on talented young furnituremakers

AsaC, member | September 17th, 20112 comments

Prizes were awarded last night in Rockport, Maine, at the opening of "Regeneration: Fine Woodworkers Under 30," a juried exhibition co-sponsored by the Center for Furniture Craftsmanship and Fine Woodworking magazine, a special e

view details

captain's chest

YOUNGNICK, member | August 11th, 20111 comment

A captains sea chest given a face-lift. It was intended for an 18 year old's birthday so the seaworthiness was not required , so no heavy lock, metal straps far too gothic and heavy carved initials...

view details

Shane's Backyard Workshop

shanekelvey, member | July 14th, 2011

This blueprint consists of a overall close to perfect workshop. As you can see I laid out all of my machines and materials in a orderly fashion in a letter C shape. Starting at the bottom you pick...

view details

Bonnet Top Highboys

rogerlandry, member | June 10th, 20114 comments

Several of you members wanted to see a better view of these 2 highboys I finished for my wife this past April. Making them at the same time was a big time savings. All together, they took about...

view details

Some of my work done at North Bennet Street School

ACCustom, member | May 26th, 20113 comments

All work done while at North Bennet Street School to see more pics go to http://accustomfurniture.blogspot.com/

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

Half Size

MKConstruction, member | April 26th, 2011

This Model hapens to be half the size of my existing shop. I currently have a 24 x 40 shop/garage, but no where near the tools that I have placed in my dreamshop on here. If I ONLY had the money...

view details

Twin Bonnet Tops

rogerlandry, member | April 15th, 20117 comments

As a woodworking hobbyist in my spare time, I had always wanted to make the highboys in FWW issue #117 from 1996. With the work and detail involved, I figured it would be just as frustrating if...

view details

Beautiful furniture from reclaimed materials

AsaC, member | March 13th, 201115 comments

New Orleans' Green Project hosts an up-and-coming furniture contest every year, with every pieces made from reclaimed and salvaged materials. The results are beautiful

view details

Andiroba Humidor

jwiggers, member | December 7th, 20107 comments

The design of the Andiroba Humidor resembles a sculptural hybrid between human and tree-like forms. The exterior is crafted from Block Mottled Tangare as two interlocking half shells which...

view details

lingerie Cabinet

tpanabaker, member | November 5th, 20101 comment

This is a lingerie cabinet I built for a customer. Curly Cherry with curly maple graduating drawers, Ebony pulls also graduate with the drawers.

view details

Butterfly Tavern Table

PineHillPrimitives, member | May 7th, 2010

Light Figure Tiger Maple Butterfly Tavern Table. Stained with aniline Dye, Shellac, and top coat of wax.

view details

Massachusetts Flat Top Highboy

PineHillPrimitives, member | May 1st, 201013 comments

I made this Tiger Maple Highboy after seeing one made from about 1750. This version has over 195 handcut dovetails, all solid wood drawer sides and bottoms, and 2 hidden drawers. The crown molding I...

view details

showing 1 - 20 of 49 posts
1 2 3 Next >