showing 1 - 20 of 95 posts
arts and crafts
1 2 3 Next > Last
I perform this Maloof inspired walnut rocker with some luck, and some personal detail add on.
It take 200H..
Finish with Danish oil and oil-wax.
Dr Richard Zimmermann-Belgium
I have made this for my wife on 10th anniversary 2015.
Maple burl and curly was used in front doors with wenge frame.
Walnut wooden hinges were utilized to install the front doors.
Greene & Greene...
Inspiration for this pair of bedside cabinets came from a Michael Pekovich video workshop. I reduced the height to accommodate other furnishings, but otherwise followed the published plans. The...
Woodworking is a great art and hobby that you can quickly turn into business. You need to know that different woodwork projects will have different markets. For instance, if you are making toys, then...
Finishing up the grid work went faster than I thought it would.
I designed and made this plaque for a boss and best friend. I was made from mahogany and red oak. I took me about a month to finish this project. Everything was built by me except the cardboard...
I designed this contemporary arts and crafts-style vanity for my daughter as part of the master bath renovation I'm doing in her 1949 bungalow. The cabinet sides and bottom are oak veneered...
Sculptural 4 Drawer Cabinet on Cantilevered Frame
Functional and Sculptural…
…The frames are my refined interpretation of a barn structure
…Showing the beauty and strength of wood in dynamic...
This media cabinet was commissioned by my "day job" employer to live in our Corporate Board Room. The dimensions constrained the cabinet to fit between a support column and a wall and needed to be...
Nightstand in a style that is partly Asian and partly Greene and Greene. The arched breadboard ends and arched rail are reminiscent of the gate to Shinto temples, thus the name Torii. Made of hand...
Dovetailed birch cabinet with marquetry panel. Some of the woods I used are manzanita, walnut burl, rosewood, and anigre.
Cherry finished with Boiled Linseed Oil, 2 coats Dark GARNET Shellac and 3 ooats Polyuretane. Photo 3 is a sideboard located in the Dining Room. I used a Kreg Jig and used pocket hole construction.
I made this cabinet with inspiration from the old dry sinks. All of the materials used to make this project are from reclaimed lumber. I also reclaimed the raised panel from an old broken door I...
This is the second one of these I made the first one sold within a month. Made of nails and tacks. The colored tacks had to be hand painted. Nailed into two layers of plywood, 1 3/4 and the other 12...
Sewing Centers / cabinets available for retail purchase tend to be large fold-out and fold-open units using mostly man-made materials and mass production joinery. After consultation with my local...
I came across an incredibly lovely board of Santos mahogany one day, with swirls of vanilla and orange in the grain, that board is what inspired the whole piece. The legs are ebonized maple with a...
This piece started out as a small cabinet for my wife's office while also helping me build my portfolio. I wanted a small case that would lend itselft to small production runs while still being...
This is a sculpture that I just had to do. Every artist puts on the wall what he thinks is improtant, so I thought I would just put this up and ask the question, Why would Anyone Make this? Made from...
From the through-mortise-and-tenons to the leaded-glass panel there's lots to explore in this technique-packed Video Workshop.
Set of Synagogue Furniture is made by gluing up the large rounds then cutting them up to create the doors and seperations. made from solid wood, handcarved, and gilded. See our website for video...
Save up to 51% on Fine Woodworking
Become a Better Woodworker