Fine Woodworking Magazine subscribe online extras Shop Books, Plans, & more

member page

Videos Techniques Tool Guide Materials Plans & Projects Gallery Workshop Community

tag: built-in

showing 1 - 20 of 174 posts
1 2 3 Next > Last

Sort By:

Subscribe to RSS feed

Mahogany Office

fat418, member | April 29th, 2012

The office was constructed of book matched mahogany veneered plywood. The applied moldings on the doors are solid mahogany. The arched curved paneled entrance way and arched desk area are...

view details

Bird's Eye Maple Kitchen

fat418, member | April 1st, 2012

The exterior surfaces were veneered in a heavy figured bird's eye maple veneer using mdf as a more stablized substate. The interior cabinetry was lined with black mica and all the...

view details

Six device charging station is installed between wall studs. I made it out of cherry and maple and powered it by a nearby outlet. The cover over the power bay is an erasable whiteboard and is held in...

view details

Floating Corner Shelf With Drawers

Wonkey, member | February 19th, 20122 comments

I was struggling to come up with a design for a corner shelf that was more functional than a simple board on some brackets. A drawer was a basic requirement but clearly a design challenge for a...

view details

Ontario Carriage House Shop

artefact, member | January 22nd, 2012

My dream shop is in a restored 1850 carriage house on the back of my property in Southwestern Ontario, Canada. Its a timberframe structure with a stone foundation. With a main floor...

view details

Colonial style kitchen

byrd1, member | January 8th, 20124 comments

Colonial inspired kitchen. Made of cherry with curly cherry drawer fronts. It has inset doors and drwers with mortise an tenon beaded face frames. It has a hand rubbed oil/varnish blend finish with a...

view details

Lou's 2nd level garage shop

sawzall316, member | December 25th, 2011

This is the main part of my shop. It is located in the garage's loft area. The loft level has a gambrel roof so the double wall will hide HVAC, wall cabinets, air cleaners, and a hidden wood...

view details

Built-in Entertainment Center

schumanx5, member | December 19th, 20113 comments

We wanted a built in entertainment center to fit our TV so this is what I came up with. I designed it on sketchup and then built it. The case is MDF and the face frame is pine. The glass doors were a...

view details

Bev Mart

hapner, member | December 7th, 2011

This shop would be our attic. the walls are slanted, so table top tools work best for storing, and have floor space. This also allows me to stock lumber on the shorter knee walls. So far...

view details

A Better Way to Fit Mitered Trim

MPekovich, member | December 7th, 20119 comments

Faced with installing lots of mitered molding on doors for a built-in project, I came up with a technique for fast, perfect results.

view details

Ryan Floating Media Shelf

SchefflerWorkedWood, member | November 8th, 20112 comments

RYAN FLOATING MEDIA SHELF with HANGING DRAWER + ZEBRAWOOD INLAY ** The shelf's final dimensions are: 116"L x 12"W x 5"H ** Finish is hand-rubbed oil & wax: 5 coats...

view details

Basement Pub

madjack, member | October 28th, 20115 comments

Basement Pub for a client. Alder with poplar and birch interiors. I finished the piece as well.

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Build a Hidden TV Enclosure

jtetreault, member | July 29th, 201111 comments

Here's a fun way to hide a flat screen in a wall. An oil painting with a cherry panel back is attached to a shallow cherry box recessed into the wall. The panel is opened, and held open, by a wooden hinge and held closed by a rare earth magnet.

view details

New Mahogany Kitchen

Dean2, member | July 24th, 20111 comment

This new kitchen was an insurance replacement job when the original cabinets where severly damaged due to flooding from a broken pipe. The unique factor in this job was that the counter tops could...

view details

Shane's Backyard Workshop

shanekelvey, member | July 14th, 2011

This blueprint consists of a overall close to perfect workshop. As you can see I laid out all of my machines and materials in a orderly fashion in a letter C shape. Starting at the bottom you pick...

view details

The End Game

sparky970, member | July 11th, 2011

My shop is 25 x 35 and this is what i hope to eventually achieve. All stationary tools will be on casters to make them portable which will give me more room for assembley. i would also add...

view details

Backlit Window Seat

thomasmiceli, member | June 14th, 2011

Oak window seat with drawer. Features a backlit amber resin inlay and a custom mica finish.

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

Half Size

MKConstruction, member | April 26th, 2011

This Model hapens to be half the size of my existing shop. I currently have a 24 x 40 shop/garage, but no where near the tools that I have placed in my dreamshop on here. If I ONLY had the money...

view details

showing 1 - 20 of 174 posts
1 2 3 Next > Last