showing 1 - 20 of 31 posts
1 2 Next >
Blanket Box for my daughter. Walnut frame and maple panels.
Finished with shellac. Aromatic cedar inside.
I'm a 16 year old woodworker in Pittsburgh, and I built this flag case after hearing about the Freedom Flag Cases Project on the Fine Woodworking Website. I got the dimensions from the provided plan...
Small veneered box made with cutoffs.
Nice break to build something small after building something big.
Glove box of Maple and Morado.Handcut dovetails.Workshop-cut Morado veneer.French lacquered top.Mobile compartments.Carnauba and Beeswax finish.
Made with handtools.
Dimensions : 6.5" x 14" x...
Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside.
Inspired from a James Krenov piece.
This is a jewelry box of my own design. Dimensions are 14"W x 8 5/8"D x 7 1/16"H
It has a sliding and removable divided tray, three Brusso brass pegs for hanging necklaces, and a removable mirror...
Hello everyone; I've been absent from these pages for a while as I've been shepherding my students here and I feel like a proud father. I'm showing off a selection of their work all designed and...
Traditionally called Lady's Workbox. The piece was designed for modern use. It has two compartments for keys, watches, wallets and purses. Made out of Mahagony, Birds Eye Maple, Curly Maple, and...
I crafted this writing box for a client that wanted an exclusive and different box. The exterior and interior are all in cherry. The inlay bicolor band was made with holy veneer and...
I was commissioned to make this box as a gift for HRH Prince William & Catherine Middleton.The box is made from native sycamore and has 2 lift out trays. Each tray has been divided up...
This is a large case, 20” x 14” x 14” intended for cufflinks. The main body of the box is made from oak and birch ply – it is veneered with spectacular American sweet gum...
This is my latest commission – it is made from black walnut with sycamore inlays. The lid is made from bandsawn veneers with the grain running front to back. The flap is held in place in...
Boxes within boxes all made of squares. I like the square, its a pure shape. In fact I reckon tv sets would be better square instead of rectangular. They would certainly look nicer when not turned...
A box to store LPs made with maple burl and cherry veneer. Shellac and buffing wax finish.
This was my first attempt at using veneer. All joinery done with the Festool domino.
This dome top bandsaw box was made from pine as a gift for my father-in-law who had a stroke. The pine was wood that he had purchased before his stroke which left him partially paralyzednbsp...
Walnut and flame birch with ebony miter splines. Finished with padded shellac, rubbed out and waxed to fairly high gloss.
Red Oak and Maple Ply with Formica interior. Stained with Minwax and 3 coats of Clear Shellac. Door lifts like the old garage doors before they had multiple hinges. Simply place thumbs on...
I wanted to do a project to practice hand-cut dovetails. When I saw Steve Latta's spicebox (FWW #196) it looked like an ideal project with more than 100 dovetails. I enhanced the design with...
I have made this box for a good friend. He is a master in "ZEN" and a passionate coach helping out many people having a better life.
Save up to 52% on Fine Woodworking
Become a Better Woodworker