tag: bent lamination
showing 1 - 17 of 17 posts
frame and panel
Woodworking is a great art and hobby that you can quickly turn into business. You need to know that different woodwork projects will have different markets. For instance, if you are making toys, then...
A bygone concept car from 1951 is made a reality... with compound joinery, sapele, quilted maple, and a showstopping finish
The design of these cabinets references the typical TG&V panels found in colonial houses in New Zealand and the colours of Maori waka and buildings. The cabinets have two surfaces for bedside lamp...
This is a gilded frame and base for my wife's painting "Birds of the Bible" which depicts the 33 different birds mentioned in the bible. The mural is over 9' wide X 8' tall in 10 sections within 3...
My Myrtle Corner Cabinet is made of solid Myrtle, except for the curved doors and drawers fronts. They are laminated bendable plywood fully veneered with Myrtle Burl. I built up the laminations and...
155 gal. bow front salt water aquarium stand
This project took forever to build.
It all started when a neighbor asked me to install a bay window for them. He had his own aquarium business, like that...
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
This is my attempt at making a box float. I used a similar curve as seen in my Chou Chair design. I used a nice figured Western maple. Notice how I carried the figure from the lid right downnbspto...
This unit is in a basement theater area with 9 foot ceilings. It is constructed of poplar ply, mdf doors and poplar for face frames. Joinery is primarily pocket screws for face frames and...
This is a Sewing Treasure Chest for my wife. The bent-lamination, curved top is book matched, quarter sawn Sycamore. The case is Jatoba. The drawer sides are maple with Jatoba guide inserts. The...
Quartersawn cherry frame with quilted maple and tiger maple veneered panels,and walnut beading and pegs. The top of this hope chest is a bent lamination panel set into a frame and panel. The curved...
Wall cabinet with curved front of spalted maple burl on the outside and curly maple inside. The door, constructed with bent lamination, is covered on all edges with ebony. The exterior case is made...
My wife requested a small chest, in which to store her gardening shoes, gloves & sheers. Because I am convinced she levitates above the earth, as she never seems to get dirty, I decided it was...
Cherry, Red Oak,
Maple, Sycamore, Pecan, Red Cedar
design of this
unusual piece came to me in a flash one day, but the
execution took several months. The piece has no sides...
showing 1 - 17 of 17 posts
Save up to 51% on Fine Woodworking
Become a Better Woodworker