February 10, 2016
An inexpensive but effective way to get into veneering and bent laminations.
January 2, 2016
Curved top desk in ash and walnut. Top is ash with walnut inlay strip. Legs are bent laminations of walnut. Stretcher is also bent lamination to match curve of top.…
December 10, 2015
Made during the 3 month intensive at the Center for Fine Furniture in Maine. The uprights are of Maple laminations, the base of Maple veneer and the stand of Quilted…
December 8, 2015
I perform this Maloof inspired walnut rocker with some luck, and some personal detail add on. It take 200H.. Finish with Danish oil and oil-wax. www.my-rocker.com Dr Richard Zimmermann-Belgium
November 29, 2015
Finally, my four Fortune Garden chairs are finished. As others have pointed out, this is a lot of work, and difficult at times. With four chairs I have sawed over…
November 27, 2015
Maloof (using Brock plans) rocker. Really fun project. Shaping is fun but tedious, final scraping & sanding takes considerable time, even though I did as much as possible before glue-ups.…
November 14, 2015
Outdoor bench. Steam bent and laminated oak, leopard wood, paduak, walnut, zebra wood, ebony, Madagasar ebony. Three layers of clear epoxy and several layers of marine varnish.
October 13, 2015
This contemporary Torah Cabinet design has unique curved built from solid wood, sliding doors, and LED lighting.
September 23, 2015
hard maple. some bent lamination. finished with lye and acrylic lacquer.
September 18, 2015
Lightweight dining chairs (2.5kg) made from recycled mahogany. Various techniques are used during construction including wood bending, wood turning and routing.
Subscribe now and save up to 56%
© 2018 The Taunton Press, Inc. All rights reserved.
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 56%