tag: bent lamination


showing 1 - 20 of 264 posts
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Tower Table

Tower Table

2 comments

The Tower Table is a hall table inspired by the Seattle Space Needle. The top is of figured Maple base is Walnut. The curved legs are made of bent laminated slices of Walnut.  The outside of the...

view details
Wenge, Sapele, and Zebrawood raised Platform bed

Wenge, Sapele, and Zebrawood raised Platform bed

I decided it was time to make a new King bed for the Master Bedroom with all the fixins'. Headboard and bedside tables mount to the wall with french cleats. I really like exploring the use of...

view details
Small meeting table in Ash and Walnut

Small meeting table in Ash and Walnut

Small meeting table with ash top with walnut inlay and walnut legs.  Designed as a complementary piece to previously posted computer table.  This ash top was made from same reclaimed urban tree...

view details
OLSENS CHINESE ELM BENCH

OLSEN'S CHINESE ELM BENCH

2 comments

THIS PIECE WAS MADE TO WORK WITH A RUSTIC BEDROOM SET FOR A LAKE TAHOE CABIN.  I MADE IT FROM A CHINESE ELM LOG I MILLED 3 YEARS AGO. THE WENGE INLAY WAS ONLY INTENDED FOR THE TOP TO MINIMIZE SOME...

view details
Curved desk in ash and walnut

Curved desk in ash and walnut

5 comments

Curved top desk in ash and walnut.  Top is ash with walnut inlay strip.  Legs are bent laminations of walnut.  Stretcher is also bent lamination to match curve of top.  I built this for a...

view details
Music stand

Music stand

3 comments

Made during the 3 month intensive at the Center for Fine Furniture in Maine.  The uprights are of Maple laminations, the base of Maple veneer and the stand of Quilted Maple veneer.  The tilt and...

view details
A Maloof inspired walnut rocker with some little variations.

A Maloof inspired walnut rocker with some little variations.

4 comments

I perform this Maloof inspired walnut rocker with some luck, and some personal detail add on. It take 200H.. Finish with Danish oil and oil-wax. www.my-rocker.com Dr Richard Zimmermann-Belgium

view details
Fortune Garden Chair

Fortune Garden Chair

2 comments

Finally, my four Fortune Garden chairs are finished. As others have pointed out, this is a lot of work, and difficult at times. With four chairs I have sawed over 200 plies and glued 40 laminations...

view details
Sculpted Rocker

Sculpted Rocker

1 comment

Maloof (using Brock plans) rocker. Really fun project. Shaping is fun but tedious, final scraping & sanding takes considerable time, even though I did as much as possible before glue-ups. I...

view details
outdoor bench

outdoor bench

1 comment

Outdoor bench. Steam bent and laminated oak, leopard wood, paduak, walnut, zebra wood, ebony, Madagasar ebony. Three layers of clear epoxy and several layers of marine varnish.

view details
Scroll Torah Cabinet for Synagogue

Scroll Torah Cabinet for Synagogue

This contemporary Torah Cabinet design has unique curved built from solid wood, sliding doors, and LED lighting.

view details
Idos music stand

Ido's music stand

1 comment

hard maple. some bent lamination. finished with lye and acrylic lacquer. 

view details
dining chair

dining chair

5 comments

Lightweight dining chairs (2.5kg) made from recycled mahogany. Various techniques are used during construction including wood bending, wood turning and routing.

view details
TV Lift Cabinet - Large Radius

TV Lift Cabinet - Large Radius

2 comments

Large Radius TV Cabinet for 65" TV.  Designed and built to fit in the specific spot shown in pictures.  Constructed of Walnut and Wormy Maple.  Walnut Frame is a bent lamination.  The doors and...

view details
KK Sofa Table

KK Sofa Table

2 comments

Sofa Table, 74x24x16, out of Madrone and Bird's Eye Maple. Bent laminations, double floating tenons, and a huge thank you to SketchUp for helping me with curves, geometry, and joinery. A challenging...

view details
Curved front curly maple sofa table

Curved front curly maple sofa table

The 'sofa table' shape has always pleased me in size and functionality. The elements that I wanted to include were; 3 drawers, bottom shelf, and beveled edges under the top. I had purchased...

view details
Woodworking Business - What To Build To Make Profits

Woodworking Business - What To Build To Make Profits

2 comments

Woodworking is a great art and hobby that you can quickly turn into business. You need to know that different woodwork projects will have different markets. For instance, if you are making toys, then...

view details
Inlayed MesquiteTable

Inlayed MesquiteTable

1 comment

Pieced together from remenants of previous projects, this small table features sculpted live edges and turquoise inlay. The apron pieces beneath the floating top are fabricated from bent wood...

view details
Persian Armoire

Persian Armoire

1 comment

Solid walnut persian style armoire. The doors are two bookmatched slabs with crushed turquise and brass powder inlayed into knots. The three towers on each side draw inspiration from middle...

view details
Maple veneer Lamp

Maple veneer Lamp

Hi Folks, This is a Lamp I made from some left overs. The main 3 legs are brown Ebony and the pieces diving these are cocobolo, as is the top piece above the shade. Thelamp shade is Maple Veneer. I...

view details
showing 1 - 20 of 264 posts
 1 2 3 Next >  Last

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

403715 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

carlfargman carlfargman
joined Apr 29
rond22 rond22
joined Apr 29
BrettCallent BrettCallent
joined Apr 29

pujahome pujahome
joined Apr 29
gilyost gilyost
joined Nov 3
user-2353765 user-2353765
joined Dec 22


Create your profile now!