Become an ONLINE MEMBER and get exclusive access to articles, videos, plans, and more
showing 1 - 14 of 14 posts
Hi Folks, I built this Laptop Table mainly to make it more cofortable to use a laptop in bed, as I'm sure many of you may well do. I also felt that while using it on the bed cover, the actual air...
This table is 25"H X 22"W X 15"D. I used Olive Burl veneer and Ash. The open circle is made from laminated Ash. The top is finished with precatalyzed lacquer, the rest has wipe on poly.
The 'Effigy of the Mind' was created to emphasise the creative thought of the mind. The seat profile was the only pre determined element of construction. The creation that followed was built up one...
It was made with steam bent laminated ash. And the back side of the backrest in in Wengè.
Hello everyone; I've been absent from these pages for a while as I've been shepherding my students here and I feel like a proud father. I'm showing off a selection of their work all designed and...
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
The Allium Floor Lamp in Green
This lamp is made by laminating thin strips of ash in a bending form followed by careful hand shaping. It’s then dyed a dark emerald green and finished with a...
In my profession I work with Commercial & PR. I'm a "one man band":
• Copywriter (in Swedish any how)
• Art Director
• Web Designer
The chassis for this chair is essentially one piece, it is bonded long grain to long grain, there are no traditional "joints" used. The seat and splat are joined to the frame...
This table is veneered in Mahogany and curved on every surface except the top...I used Ash for the bread-board ends and the tapered, bent-laminated legs; I added two plys of Mahogany around the...
Made in English ash with burl walnut veneer this design was my take on a photo which appeared in Fine Woodworking Readers Gallery courtesy of Mr Daniel H Phillips of Dallas Texas. Thank...
Everything made is of Shaker inspired design. I have made many Shaker pieces over
the years. Oval boxes are made of various domestic and exotic woods.
A unique design employing bent lamination backbraces and rockers, floating backbraces that bend and turn to conform to the sitters shape and a coopered headreat which lets the grain flow in only one...
Inspired by the Alvar Aalto's tea carts from the 1940's. My client who is a designer came up with this design. The lamination were the most challenging part of this piece. 24 layers of 142"...
showing 1 - 14 of 14 posts
Become a Better Woodworker