showing 1 - 20 of 22 posts
1 2 Next >
Segmented Bowl in Florida Cherry and Tiger Stripe Maple.
Finished in a combination of Linseed oil and Polyureathane, thinned with Mineral Spirits.
Topped with two coats of Crystl Wax.
I decided to try wearing a simple single-use molded surgical mask when working with my router or table saw or when I produce a lot of wood dust while sanding. During my active practice as a surgeon...
Woodworkers help heal local veterans through the art of turning.
Bowl turned from a single piece of beech on my Woodfast midi lathe. Aprox. 7". Finnished with Liberon finnishing oil and topped with shellac. The bottom surface is matte (no shellac) and equipped...
Hello everyone; I've been absent from these pages for a while as I've been shepherding my students here and I feel like a proud father. I'm showing off a selection of their work all designed and...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
A hall table veneered with macassar ebony and french polished. There is a central drawer made from ripple sycamore for the sides, base and back and Cameroon ebony ( jet black) for the front...
White Oak Solids and Shop-Sawn Veneers.
WB Satin Poly over White Glaze and Dye Stains
The shelves are solids, bookmatched, with breadboard ends pegged ....and I learned that "Rule of Thumb" is not...
My better half wanted a pair of plant stands for our dining room. They had to be small, art deco in style and primarily mahogany. The tops were turned from solid mahogany, and the legs were joined to...
Dunlop Brother's 18th Century reproduction New Hampshire candlestand
Cherry and Tiger Maple
The Dunlap Brothers made unique furniture. This candlestand is a simple, and I think a...
This is an abstract working model of Howard Hughs's Spruce Goose made of thirteen ply plywood. I was given a palate of this wood and was buring it for fire wood before I realized I could...
Scandinavian style workbench. European beech with purpleheart accents. Hand turned brass pins support the bow saw and carpenters mallet. Project for Red Rocks Fine Woodworking...
my son made this lamp from scrap 3/4 X 3/4 X 2 1/2" pieces of walnut, oak and maple
Jewelry Box made from Pommele Sapele & Bubinga veneer, black walnut, & Birdseye maple - silver gilded ends with a chemical patina.
Cylinder design with 2 removable form fitted...
Aboyna burl shave brush with silvertip badger knot. Finished with the Beall buffing system. Credit goes to William in the Gallery for the idea.
Further steps in making a reproduction Georgian tea caddy
Save up to 51% on Fine Woodworking
Become a Better Woodworker