showing 1 - 20 of 21 posts
1 2 Next >
this maple burl & cherry cabinet is 15" deepx 24" wide 36" tall
and is finished in shellac to see more of my work visit www.Andersonwoodwork.net
About two months ago a friend called to ask if I could build a glider horse for his new baby daughter for Christmas. I had never done anything like this before but I said yes anyway. Then I got down...
Glove box of Maple and Morado.Handcut dovetails.Workshop-cut Morado veneer.French lacquered top.Mobile compartments.Carnauba and Beeswax finish.
Made with handtools.
Dimensions : 6.5" x 14" x...
Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside.
Inspired from a James Krenov piece.
Bowl turned from a single piece of beech on my Woodfast midi lathe. Aprox. 7". Finnished with Liberon finnishing oil and topped with shellac. The bottom surface is matte (no shellac) and equipped...
Hello everyone; I've been absent from these pages for a while as I've been shepherding my students here and I feel like a proud father. I'm showing off a selection of their work all designed and...
Hi, this is a lamp I made recently from solid Maple and Maple Veneer.
Hi Folks, I thought I'd share this. I bought some strips of super bright LED's to make a floor standing light with them. Mainly to use up some scraps I had and to be able to read during the winter...
Boxes within boxes all made of squares. I like the square, its a pure shape. In fact I reckon tv sets would be better square instead of rectangular. They would certainly look nicer when not turned...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
A hall table veneered with macassar ebony and french polished. There is a central drawer made from ripple sycamore for the sides, base and back and Cameroon ebony ( jet black) for the front...
My better half wanted a pair of plant stands for our dining room. They had to be small, art deco in style and primarily mahogany. The tops were turned from solid mahogany, and the legs were joined to...
This is a country style dry-sink I did that we needed for our washroom. It's entirely pine except for the ceramic counter to prevent little accidents. I kept the carcasse box-joint prolonged to pop...
Jewelry Box made from Pommele Sapele & Bubinga veneer, black walnut, & Birdseye maple - silver gilded ends with a chemical patina.
Cylinder design with 2 removable form fitted...
I made this chess table in 2007 with cocobolo, maple and cherry. The frame is cherry with 1/8" thick maple and cocobolo veneer. The pulls and beading are cocobolo. The table has two drawers and two...
This chess set is made of walnut and maple, the top is walnut and maple veneer and the drawer fronts are zebrawood veneer. I turned the pieces on my midi lathe from walnut and maple alsonbsp...
Stickley / Limbert inspired. Made from quartersawn English oak (quercus robur) and finished with stains, shellac and beeswax.
An oak jewelry box with curved front drawers made for my daughter's Christmas present. The case and drawer fronts are from a single board. Drawer sides and dividers are maple with pine...
Save up to 51% on Fine Woodworking
Become a Better Woodworker