Woodworkers help heal local veterans through the art of turning.
My wife made a cutting board using some scraps I picked up at the local Hicksville Planing Mill near Hagerstown, MD. After she cut the board to length, I used the leftover piece of scrap to create...
Just had to make another one of these. Only took 50 hours to do. Lost count of the number of nails and tacks. Mahogony frame and vintage hammers. 23"x23"x3
Here some my furniture production process. Visit us on http://www.mebeljeparashop.com/
Making a dinosaur skull is a project few seldom attempt. The task for this project was to carve a wooden replica of a Deinonychus that was accurate in its features to an actual fossil. The skull...
Ulu knife cutting board by Maya, just turned 11 years old. Milling a spherical concavity in rock-hard rift sawn white oak would be a challenge for anyone.
Drill bits in various sizes
Round pieces of wood;
Primer and paint.
Sandpaper if the wooden surface needs more extensive preparation than just a coat of...
Tiger Maple and walnut keepsake box
Finish is oil with top coated with several coats of wipe on varnish, sanded lightly between coats. After the finish had cured used Maguire's swirl remover to...
About two months ago a friend called to ask if I could build a glider horse for his new baby daughter for Christmas. I had never done anything like this before but I said yes anyway. Then I got down...
My mother did this painting of my wife and I and it needed a frame. So I made a natual frame from a piece of red oak firewood.
(973)923-3273 We have more than one million board feet of reclaimed antique barn wood, wide plank flooring, siding, beams, & barn doors in stock. We dismantle, mill, install every product we sell...
My girlfirend wanted a way to organize her makeup brushes as she seems to have a lot of them. I gladly accepted this challenge as I did not see it being difficult project and I would like a more...
I made a Twin Screw Vise using my own threaded dowels. I am very pleased with how well it works. Can be used to hand cut dovetails and tenons. and more.
Watch the build video here
Get the Plans Here
Lucy has been the longest running TV show so I thought why not have her tighed to a chair having to watch her own show?Oak hardwood floor Pine two by fours and hand made oak TV set. The Hollywood...
Do you have a digital inclinometer in your shop?
ROOSEVELT CIGAR SIDE TABLE
Materials: Maple Burl, Zebrawood, Steel
Dimensions: 13"L x 11"W x 13"H
Finish: Hand-rubbed oil (fully cured), shellac, and spray lacquer for added durability...
This is an ottoman tray made from mostly African mahogany in my signature tray style. It's a rather large serving tray/ottoman tray at 20" x 30" and it incorporates an inlayed compass rose design...
Piece of red oak, insects feasted on the interior wood, but left behind an awesome natural cavity of decay. Wood is washed, then treated. Added a switch that controls lamp light, & nite light...
Save up to 51% on Fine Woodworking
Become a Better Woodworker