Cherry wood is responsible for this funky red lighting effect - a chance discovery on my side :) Furthermore, it combines nicely with fir in terms of texture and color. The lampshade, the cover for...
The lamp is made of beech wood, walnut and carved coconut. The carvings create light drawings on the wall - one of the nicest light effects I've managed to achieve so far :) . In this respect, good...
An egg shaped coat hook 'cracks' open to reveal a baby bird when a coat is hung, when the coat is removed the egg closes up again. This fun coat hook was made for my friend's little girl and is made...
Woodworkers help heal local veterans through the art of turning.
My wife made a cutting board using some scraps I picked up at the local Hicksville Planing Mill near Hagerstown, MD. After she cut the board to length, I used the leftover piece of scrap to create...
Just had to make another one of these. Only took 50 hours to do. Lost count of the number of nails and tacks. Mahogony frame and vintage hammers. 23"x23"x3
Here some my furniture production process. Visit us on http://www.mebeljeparashop.com/
Making a dinosaur skull is a project few seldom attempt. The task for this project was to carve a wooden replica of a Deinonychus that was accurate in its features to an actual fossil. The skull...
Ulu knife cutting board by Maya, just turned 11 years old. Milling a spherical concavity in rock-hard rift sawn white oak would be a challenge for anyone.
Drill bits in various sizes
Round pieces of wood;
Primer and paint.
Sandpaper if the wooden surface needs more extensive preparation than just a coat of...
Tiger Maple and walnut keepsake box
Finish is oil with top coated with several coats of wipe on varnish, sanded lightly between coats. After the finish had cured used Maguire's swirl remover to...
About two months ago a friend called to ask if I could build a glider horse for his new baby daughter for Christmas. I had never done anything like this before but I said yes anyway. Then I got down...
My mother did this painting of my wife and I and it needed a frame. So I made a natual frame from a piece of red oak firewood.
My girlfirend wanted a way to organize her makeup brushes as she seems to have a lot of them. I gladly accepted this challenge as I did not see it being difficult project and I would like a more...
I made a Twin Screw Vise using my own threaded dowels. I am very pleased with how well it works. Can be used to hand cut dovetails and tenons. and more.
Watch the build video here
Get the Plans Here
Lucy has been the longest running TV show so I thought why not have her tighed to a chair having to watch her own show?Oak hardwood floor Pine two by fours and hand made oak TV set. The Hollywood...
Do you have a digital inclinometer in your shop?
ROOSEVELT CIGAR TABLE
Materials: Maple Burl, Zebrawood, Steel
Dimensions: 13"L x 11"W x 13"H
Finish: Hand-rubbed oil (fully cured), shellac, and spray lacquer for added durability and...
Save up to 52% on Fine Woodworking
Become a Better Woodworker