Build a Round Table

Now Playing
INTRODUCTION

Build a Round Table
Download the plan and see the finished table up close to get a sneak peek at what's to come in this 12-part video workshop.
 

STEP ONE

Make a Round Tabletop 
Glue up the panels for the upper and lower tabletop, flatten them with hand tools, and cut out perfect circles on the bandsaw.

Related Video: Perfect Panel Glue-Ups 

STEP TWO

Smooth a Round Edge with a Spokeshave 
Learn how to clean up a round tabletop edge with a spokeshave, and apply a chamfer with the router table.

STEP THREE

Slot Mortise and Tenons on the Bandsaw 
Learn how to cut this joint, also known as a bridle joint, in a few simple steps on the bandsaw.

STEP FOUR

The Complete Mortise and Tenon Joint 
Practice cutting this joint with hand and power tools, and learn new tips and techniques for cutting, sizing, and fitting a mortise and tenon.

STEP FIVE

Cut a Half-Lap Joint 
Produce a perfect fit on the tablesaw when preparing the half-lap joinery for this table's stretcher and rail assemblies.

STEP SIX

No-Stress Glue Up 
The assembly stage of any project will make you sweat unless you're prepared. Watch how the author assembles this table in multiple stages, and pick up great tips for any project assembly.

STEP SEVEN

Inlaying a Square Peg 
Use a mix of hand and power tools to cut the peg mortise and shape the beveled edge once it's installed.

STEP EIGHT

Installing Glue Blocks 
Reinforce the half-lap joinery with glue blocks and take home tips for cutting and installing them precisely.

STEP NINE

Finishing Walnut 
Prepare the surface with planes and a little sanding, and learn best practices for applying a wipe-on varnish.

STEP TEN

Attach a Tabletop With Screws 
Elongated holes allow the wide tabletop to shrink and expand without coming unglued.

STEP ELEVEN

Level Uneven Table Legs
This smart technique on the tablesaw is the easiest method for leveling uneven table legs.