sazsall

Littleton, CO, US
member


Subscribe to my RSS Feed

Contributions

Holding a Wynn Filter on a Harbor Freight Dust Collector

Instead of using plywood rings and internal bolting or clamps to hold the Wynn Invironmental filter on my HF dust collector I drilled 4 equally spaced holes around about 1/2" below the upper...



Recent comments


Re: Draw latched a more elegant solution in adapting Wynn filter to Grizzly Dust Collector

I also installed the Wynn 35 Series filter on my Harbor Freight dust collector. Instead of cutting rings I simply placed 3/4" thick rubber weatherstripping on the botton of the filter. To hold the filter down I drilled 4 holes (3/8") equally spaced around the upper rim and about 1/2 inch below the rolled edge. Cut a circle about 4 inches larger than the diameter of the filter from fiber board and drilled 4 holes in it corresponding to the holes in the collector rim. Took four lengths of 1/4" all thread rod, bent one end and inserted each in the collector rim and the other end through the holes in the fiber board which was placed on top of the filter. Put washers and nuts on top and tightened them down.

Re: UPDATE: Mortise and Tenon Joinery by Hendrik Varju

As a beginner in real mortising the DVD would be a real asset. Thanks for the opportunity.
Don

Re: UPDATE: Woodworking 101 by Aime Fraser, Matthew Teague, and Joe Hurst-Wajszczuk

Wow!! Would love to have the book. Every bit of information on woodworking is useful and the basics are "reguired".
Thanks for the offer and opportunity.

Re: UPDATE: 2011 Fine Woodworking Archive DVD-ROM (1975 - 2011)

WOW!!! Fine Woodworking website is the best. The videos, techniques, tool guides, plans, etc. are the best and most comprehensive out there. Thanks for all the available info in one location! Keep up the effort and great work.
THANKS!!!



Advertise here for as little as $50. Learn how