quatorze


member


Subscribe to my RSS Feed

Contributions

Benchtop Template Multirouter phase2

These are some photos of my multirouter in the second phase. I build it and now it is time to test, adjust and setup this jig. I have to make templates for it too. This will take some timeespecially...

Benchtop Template Multirouter prototype plan

These are photos of my prototype Multirouter. You can use it as a 1:1 template router, or as a fixed normal benchtop router table. The multirouter is not yet completly evolved, I only will share the...

Plane for edgebreaking(2)

This is a simple jig for edgebreaking after instead of before a workpiece is made.Particularly after fixing together tenon and mortise,because with this jig you can reach till the edges.The blade of...

plane for edgebreaking

This is a simple jig for edgebreaking after instead of before a workpiece is made.Particularly after fixing together tenon and mortise,because with this jig you can reach till the edges. The blade of...

edgeclamp made of scrap

This is an edgeclamp with Bernoulli-spiral clamping feet. A drawing of this spiral you can find on the internet, and on your inktjet printer you can give up the scale you wish, so you have a...

Adjustable wedge for edge clamping

These wedges are made of scrap,as you can see. I used old or new hinges of all kinds,depending of what I had in stock. To protect the pressing point in the wood I inserted a roof nail shortenedOn...



Recent comments


Re: Benchtop Template Multirouter phase2

The most important of this jig is the design: in this case for a
router of 500 watt. For the router I use, the frame is strong enough.
You are right,when you use a router of 1200 watt then you have, of course, to adapt the dimensions and the bearings.
This design shows, I hope, how to integrate several functions in one compact machine.
For the moment I have a " winter stop" , I have not such a great workplace and no heating in it.



Advertise here for as little as $50. Learn how