Senomozi
Gatineau, QC, CAmember
Gender: Male
Contributions
Bird's Eye Maple Bathroom Cabinet
The starting point for the design of this commission was the man-made marble top, which has rounded front corners. The customer wished to have a cabinet that would echo this feature. After a few...
Rustic Entry Bench
This is a rustic entry bench I built for my Dad’s 68th birthday. It fits nicely with the style of his home. It is made from a single slab of birch that had been air drying since 1968. ...
Keepsake Walnut Coffee Table
Loosely inspired from Federal Style furniture, this solid walnut coffee table was built for a customer who wanted to display keepsakes of their family vacations. The top features an inlay strip...
Studio Side Table / Candle Stand
I wanted to design and build something really distinctive and use it as a showcase piece for my business. I wanted something small packed with many different woodworking techniques. The...
Bedroom Closet Built-in
The starting point for this project was a typical bedroom closet with bifold doors. The first step was to re-frame the door opening to make it almost as wide as the inside of the closet space. ...
Craftsman Vanity and More
Three years ago or so we renovated the basement bathroom. Part of the reno was to build a vanity and a small cabinet to store bath stuff (soap, shampoo, etc). That was all done within the time...
Sailboat Cabinet and Table
Customers for whom I built a wall unit asked me to build a small cabinet and a larger table for their sailboat. I had zero experience with boat furniture but they did not mind being guinea...
Walnut Entryway Seat
This is a simple black walnut and maple entryway seat sized to fit in the available space. All solid wood construction except for the seat bottom, which is walnut veneer plywood. It will eventually...
Dining Room Wall Unit
Dining room wall unit built from birch veneer plywood and solid birch. The bottom section is a single cabinet with three compartments. The profile of the doors matches that of the kitchen cabinets...
Large Living Room Wall Unit
This solid oak and oak veneer plywood unit is 9' high by approx 14' linear feet of facade. All built, stained and varnished in the shop, then installed in the customer's home. The...
Threesome of Living Room Tables
Solid red oak and walnut living room tables built for the same home as the dining table described below. All tables feature leg assemblies where the horizontal pieces form part of the top and...
Headboard and Footboard
Headerboard and footboard for a three-quarter bed built for couple who hired my services after failing to find something suitable in stores because of the unusual size (48" wide). The most...
Bathroom Built-ins
These narrow built-ins were ordered by a customer needing storage space in a tiny bathroom. The stain colour, moldings (head, base, door faces) and the the bead detail around the doors and...
Maple Side Table
Solid maple side table featuring a breadboard top and double apron. The tiny pieces joining the upper and lower aprons are tenoned to fit into matching mortises in the aprons. Legs are tapered...
Arts and Crafts Coffee Table - Two Flavours
Arts & Crafts coffee tables in two flavours: cherry and white oak. Both tables feature breadboard ends with five-facet tips and ebony plugs. The square holes in the top are echoed in...
Birch Sideboard
Solid birch sideboard with walnut bead accent around drawer and door openings. Rails and stiles are joined with contrasting walnut splines. Doors swing out 180 degrees on Brusso knife...
Pine Corner TV Stand
Solid pine corner TV stand loosely inspired from traditional French-Canadian pine cabinets. The six inch high recess provides decent space for AV equipment. Raised panel doors swing 180 degrees to...
Walnut TV Credenza
This TV credenza features a top made out of walnut burl veneer panels wrapped with 1 1/8" thick solid walnut joined at the corners with re-inforced miters. The top has a curvy front edge, a...
Provence Dining Table
Massive Provence dining table featuring a 1" solid walnut top. The solid red oak leg and horizontal cross-member, which are both 4" large x 4" thick, form a corner assembled with a bridal...
New on Fine Woodworking
Dovetailed hall table
accentcreate | February 12th, 2012
Arts & Crafts Dining Table
Turbochief | February 10th, 2012
Chiffonier in Elm Burl veneer
mouppe | February 10th, 2012
Recent comments
Re: Provence Dining Table
Hello BoulderBill,
posted: 5:10 pm on December 3rdSorry for the late reply, I only saw your comment today. I just uploaded a picture of thre plan I used. It is not a complicated piece so I did not go overboard with plans showing every detail.
As for the leaf extension hardware I bought the extra heavy duty slides at Lee Valley: http://www.leevalley.com/hardware/page.aspx?c=1&p=50505&cat=3,43614,43620&ap=1.
If you have more questions please write me at info@senomozi.com.
Re: Semainier Australiene bedroom set
Very very nice. I like the use of contrasting woods. My favorite part are the legs and the way they are attached to the carcass. Very elegant. Nicely done!
posted: 12:23 pm on October 8thRe: "Dunes"
Beautiful, beautiful box. Too bad I can't feel its curves by touching my monitor ;-)
posted: 8:51 am on October 1stRe: "Deco"
Really beautiful box. I love the contrasting woods and the organic feel. Would you mind sharing the wood species and the finish you used?
posted: 8:48 am on October 1stRe: What's your favorite hand or power tool?
My favorite tool is my Lee Valley 4" double square. I keep it in my apron and I probably use it 50 times a day to setup bit/blade height, distance to the fence, laying out joinery, ensuring stock is milled square and so much more. It is almost as useful as a pencil!
posted: 10:48 am on September 4th