• Shop the Store
  • Best Sellers
  • eBooks
  • Books
  • Plans

  • Videos
  • Tools & Workshops
  • SketchUp

  • Finishing
  • Turning
  • Joinery
• Books
• Plans
• Videos
• Magazine
  • Subscribe
  • Renew
  • Give a gift

  • Current Issue
  • Digital Issue
  • Online Extras

  • Magazine Index
  • Contact Us
• Subscribe
• Renew

• Blogs
• Knots
• Gallery

Jig Design in SketchUp - A Little Reverse Engineering

David Richards, contributor

10 users recommend

Add Comment
Print

While I am working through the drawings for a project in SketchUp, I am also thinking about how I'd go about building it in my shop. I work out the order of operations and figure out how to group processes to reduce setup time in the shop. Doing that helps me avoid mistakes when I'm actually cutting the wood. This also gives me a chance to think about the safety of the various operations before I get to the shop. Sometimes I decide that I'll need to make a jig or a template to complete an operation. If a jig or template is needed, it can be designed right off the model. Templates can be printed to full size as needed.

I've been working on a design for this sideboard and wine server for our dining room. Actually, the design work has been done for awhile and I've been letting it cook for awhile to see if this is what we really want.

The joints between the sides and the tops are through dovetails. These pieces are drawn at 2" thick, the sideboard is 7' long and the wine server is 56" tall. I've decided I'll cut the dovetails with a router. The parts, though, are too large to handle with the Router Boss so I'll make myself a couple of templates to follow with a handheld router instead. I'm also using a large HSS dovetail cutter for which I've not found a commercially made template.

Designing the templates is simple enough. Since the joints are identical between the two pieces, I copied a side and the top from the wine server on which to work out the templates. Since these pieces are components, it was easy enough to copy them with Ctrl+Move. Then working right on those components, I drew the parts for the templates while thinking about how I would support and guide the router. I'll be able to make the templates using the Router Boss setup to cut dovetails as normal. Theoretically it should all work perfectly. Normally, if I was only making the illustrations for my own use, I wouldn't bother with applying materials. I did that for this blog post.

Dave

Add Comment Print

Key Subjects Indexed to Archived Posts

Back to List

Making a Window Sash or Breakfront Cabinet Door

Comments (4)

DaveRichards writes: Bob, yes. It's a known issue and it's being worked on.
Posted: 2:02 pm on March 7th

Bob_S writes: The print function only allows 1 page to be printed
Posted: 1:35 pm on March 7th

DaveRichards writes: woodruf, thank you and you're welcome.

Regarding the Router Boss, I doubt you'll find anything more about it here on the Design. Click. Build. blog but you can find out about it at chipsfly.com

Dave
Posted: 7:48 pm on January 13th

woodruf writes: David, I like your linear thinkng on this. Everything you said seems very logical and straightforward and helpful..

Also, how do i find out more about the "Router Boss" which you refer to?

Is there not a way to search this blog? How?

Thanks for your contributions ;>

Posted: 7:58 pm on January 11th

You must be logged in to post comments. Log in.