Best Tabletop Finish
Buying and Using Trim Routers
T-Track is a Smart Workbench Accessory
How to Apply an Aerosol Finish
Five Minute Guide: Glue-Ups
Router Jig for Perfectly Aligned Dadoes
How to Cut Sliding Dovetail Joints
How to Sharpen a Card Scraper
Upgrade Your Jointer with a Segmented Cutterhead
Tablesaw Tapering Jig is Safer and Faster
How to Drill Windsor Chair Mortises
How to Make a Simple Jig for Offset Knife Hinges
3 Steps to Great Glue-Ups: Sliding Dovetail Joints
Five Minute Guide: How to Use a Tablesaw
Box Making Tips and Tricks
Fixing Woodworking Mistakes
Dedicated Sled Delivers Perfect Finger Joints

Portable mill sawing up a local Cherry tree

comments (11) January 16th, 2012 in blogs

John Tetreault, Associate Art Director

15 users recommend

Here's a photo of the 8 foot section being squared up.

Photo: John Tetreault

Add Comment
Print

A neighbor of mine had a 16 inch diameter Cherry tree come down in his yard during a recent storm. It was going to be cut up for firewood, but he said he would be glad if it could be put to better use, so I called a local sawyer with a portable mill.

On a crisp, but sunny December day, the sawyer pulled up next to the tree and set up the mill. He charged a certain amount per hour, which was very reasonable, and I was the "helper" for the day.

The best part of the log was about 14 feet long and 16 inches in diameter. It was straight for 8 feet and then took a little turn for the other 6. We cut it at the 8 foot point and I decided to have that section cut at 4/4 thick. I had the 6 foot section cut thicker for legs and such, at 10/4.

There were also a few shorter 3 foot long pieces that I had squared up. One a full 16 inches square, and the second 11 inches square. I'll turn these into solid breakfast bar stools or maybe end tables.

To start sawing we first moved the logs up to the mill with peavy's. Once the log was at the side of the mill, two hydraulic "arms" pick up the log and place it on the bed of the mill. Then a little spiked "hand" helps to roll the log into place up against a system of movable fences that adjust in height along the back. The whole system worked very smoothly, and the bandsaw itself cut through the log much faster than I thought it would.

What a great way to spend a saturday afternoon. The sawyer was a downright pleasant guy and a lot of fun to work with. And being there to see the wood exposed, thinking about how you want to use the wood, and deciding how to cut it up in real time, was real fun.

posted in: blogs, cherry, saw mill, wood mizer, portable saw mill

Add Comment Print

The life and times of a Fine Woodworking photo prop

Back to List

Preserving the Architectural Past in the Internet Age

Comments (11)

RockMaple writes: Over the past 3 years in the greenspace directly behind my brother's house in the Muskoka area of Ontario, Canada, there have been two blowdowns of several sugar maple trees from storms. These nice straight 12-16 inch diameter trees stopped falling at a 45 degree angle, fetched up in other trees. The town (who own the greenspace) came and fell them the rest of the way but I requested that they leave them whole instead of chopping them small and removing them. They complied and I then cut them into 5-6 foot lengths so they would fit on my utility trailer (we estimated one load was about 1500 lb. - they were heavy!) and took them to a sawyer. I got over 600 bd ft of 4/4, 5/4, and 8/4 lumber, all hard maple. Total cost was less than $100. Very economical way to obtain nice wood. But I agree that there is a risk you will have to pay for damage to the sawyer's equipment if he encounters buried metal - luckily I did not. I stickered it and air-dryed it in my small backyard.
Posted: 5:23 pm on January 22nd

ddewees writes: A word of advice. Many sawyers will not cut yard trees, or if they do they will have you agree to pay costs if they hit metal. Many trees that are near houses have had spikes, hooks, fence wire or other metal attached to them over the years and hidden by later growth. It is quite expensive in broken teeth or bands, time consuming to replace damaged blades, and dangerous for the sawyer or bystanders when metal is encountered. Don't be surprised if you get turned down on sawing that favorite tree with the perfect log.
Don in Vermont
Posted: 7:45 pm on January 20th

AEW writes: The Wood Miser website has a listing of owners who are interested in milling. There is a website, ArboristSite.com that has a section on Milling where the people who have mills congregate and communicate. However, remember that this group tends to be more professional types who will not want to deal with yard trees where someone has a 12" walnut tree next to their home that they think is worth a million dollars. So if you go there, be prepared for some rejection. Many times, Craigslist has solicitations from mill owners as well. Your local woodworking club or guild will also have contacts. Each state also has a state forester and many of them maintain lists of mill owners. One just needs to search for contacts.
Posted: 9:01 am on January 19th

jtetreault writes: Thanks BetsyE - great information!
John
Posted: 9:33 am on January 18th

BetsyE writes: Here's a link to a list of sawyers and mini mills that we've accumulated:
http://www.finewoodworking.com/Workshop/WorkshopArticle.aspx?id=29313

Posted: 4:02 pm on January 17th

DennettFarm writes: Wood-Mizer (www.woodmizer.com) provides many services for their customers (the sawyers). You may get some ideas from them on how to locate a sawyer. I have a person to recommend in Southern Maine if you're interested.
Posted: 2:49 pm on January 17th

jtetreault writes: Big Lou,
Really, I would ask around town. Local firewood sellers, landscapers, the guy who owns the hardware store - someone may know someone who has a mill. You can also search online, or maybe put an add in your local paper.
John
Posted: 12:17 pm on January 17th

jtetreault writes: Hi bobkidd,
I figured about 225-250 board feet of lumber between the 8 foot length section, the 6 foot section and the two 3 foot long blocks. There were a few other small pieces, plus I did cut up all the branches for my wood-fired grill.

The 36" diameter oak sounds like a beauty. I think the mill that cut the cherry log had a 26 or 28 inch capacity, so I would double check with the sawyer you find to see if his mill will handle the 36 inch diameter. I would guess you would get about 900 board feet.

Posted: 12:06 pm on January 17th

bobkidd writes: How many board feet did you end up getting? I have an Oak tree that died on me last summer. It has a 36" diameter and is stright for about 20 feet. I was wondering how many feet I might get out of it.
Posted: 9:15 am on January 17th

robbo41 writes: Louroehm:

Ask around in your locale. I found an orchardist, an engineer, and a local retired guy that all have these types of saws. Also, if you live in an area with any Amish, often many members of those communities have saws, but you have to get the wood to them.
Posted: 6:50 am on January 17th

louroehm writes: This incredible. I have a few trees in my yard that need to come down and I would rather not make mulch out of a lot of it. Sooo...I would like to know how one goes about looking for a sawyer? Any and all help is appreciated. Thankyou.
Big Lou
Posted: 10:25 pm on January 16th

You must be logged in to post comments. Log in.