A Solid Cherry Beam Becomes a Cool Stool

comments (3) January 23rd, 2012 in blogs

jtetreault John Tetreault, Associate Art Director
thumbs up 9 users recommend
First I measured and marked two lines for the finished height. In this case, our breakfast bar is 42 high, so I marked 30 for the stool height.
A circular saw set to full depth got the cut started...
...and a hand saw finished off the cut.
A low angle butcher block plane was the perfect tool for planing the top and bottom flat. Two clamps and two pieces of lumber on either side of the base held the beam in place for planing.
A few swipes on all sides removed the saw marks from the portable saw mill.
I was going to carve a contoured top, similar to a windsor chair seat, but I thought I would keep it simple and carve a circle. This way the stool can be positioned with any face being the front, or with a corner facing forward, which proved to be surprisingly comfortable. I started the carving with a gouge, and I almost left it this way, but it looked a little too similar to a crochet doily.
60 grit paper, sanding in a circle, smoothed things out pretty quickly. Switching hands once in a while, from right to left, added the Karate Kid experience at this stage.
Finally a card scraper smoothed everything out.
Boiled linseed oil for the finish.
Heres the stool in place.
I put a 12inch square of cork underneath the piece. It protects the floor, and allows you to pivot or slide the piece.
Overall, for simply being a block of wood, the small carving on the top makes it very comfortable. I think Ill add a foot rest at some point, but I havent decided if I want to carve out a recess, or add a board with sliding dovetail of some sort.
First I measured and marked two lines for the finished height. In this case, our breakfast bar is 42 high, so I marked 30 for the stool height. - CLICK TO ENLARGE

First I measured and marked two lines for the finished height. In this case, our breakfast bar is 42" high, so I marked 30" for the stool height.

Photo: John Tetreault
Add CommentAdd Comment
PrintPrint
MORE ON BUILDING WITH BEEFY WOOD 


Router Jig Turns Stumps into Beautiful Side Tables
Level Big Slabs in No Time Flat
Tour Nick Offerman's Shop

At some point, I'd like to build a few counter stools for our new breakfast bar in the kitchen. They'll be made out of curly maple and have a sculpted Arts & Crafts look. I have the material to make them, but time-wise, they are low down on my list of projects.

A few weeks ago, I had a cherry log milled up with a wood-mizer saw mill. (That's another story, and a whole lot of fun. Click here to see the portable saw mill in action.) While we were cutting up the cherry logs, I had two shorter pieces (about 3 feet long) simply squared up. I thought I would use them as temporary counter stools in the kitchen. Later I could flip them over, and move them to the living room to be used as side tables.

 

 


add to cart
Arts & Crafts Furniture
by Jonathan Binzen, Kevin Rodel From Classic to Contemporary $45.00 more info...

posted in: blogs, cherry, counter stool, breakfast bar
Add CommentAdd Comment PrintPrint
Back to List

Comments (3)

jtetreault jtetreault writes: Steve,
If the groove was running vertically down the interior (facing the breakfast bar), I could incorporate a sliding dovetail running horizontally to hold the foot rest. Both grooves together would add an interesting design element. Great tip! Thanks,
John
Posted: 9:24 am on January 25th

sloanworks sloanworks writes: obviously you dont have small children
Posted: 9:25 pm on January 23rd

saschafer saschafer writes:
To control cracking/checking, you may want to do what Japanese temple carpenters do with boxed-heart posts and beams: saw a deep longitudinal groove the full length of the piece in the center of one of the faces. As the piece dries, the groove will open up to relieve the stress.

-Steve

Posted: 12:58 pm on January 23rd

You must be logged in to post comments. Click here to login.