Reader's Gallery

Tray and Easel

comments (0) November 17th, 2011 in Reader's Gallery

Antondeg Antondeg, member
thumbs up 7 users recommend
Showing the inlay and handles that I made. The handles are doweled into the frame.
- CLICK TO ENLARGE
Add CommentAdd Comment
PrintPrint

 

My wife volunteers at a local hospital and was asked to provide something for a silent auction. So I was tasked with making an easel and a tray. I had been looking for an opportunity to do some inlay work, so I took it and put inlay in both the tray and the easel. The inlay was bought from Highland Woodworking and the main wood is Ash.

The tray is a “golden triangle”, I make the frame first and got it level then I put them through the router using a 1/4" bit and cut the groove. Then I glued in the inlay leaving it over each eadge and cut them clean with a chisel before glue up.

The easel is a design I have used and keep improving over the last 6 year.

 


Design or Plan used: My own design
posted in: Reader's Gallery, accessory, ash, inlay
Add CommentAdd Comment PrintPrint
Back to List

Comments (0)

You must be logged in to post comments. Click here to login.