Tool Addicts

Tool Addicts

AWFS Tool News: New finish combines the best of oil and water-based products

comments (3) July 22nd, 2011 in blogs

MPekovich Michael Pekovich, art director
thumbs up 31 users recommend
- CLICK TO ENLARGE
Add CommentAdd Comment
PrintPrint

I've never been a fan of water-based finishes, but a new wiping varnish from General Finishes has me excited to give them another try. Wood Turners Finish, available soon from Woodcraft and Rockler, combines the best of oil and water based finishes.

In order to create a finish that is compliant with VOC regulations, they've taken the same alkyd urethane varnish typically found in oil-based finishes and wrapped it in a water-based delivery system. The result is a finish with the warm tone and feel of an oil-based finish, but with the fast dry time of a water-based finish. It's fast dry time and it's ability to be rubbed out to a high gloss is the reason it's being marketed as a finish for turning, but there's no reason to think that it wouldn't be great for other furniture projects as well. A maple sample board rubbed to a satin sheen had a great, warm look that would compliment any project. The finish should be available within the next month and will retail for about $28/quart.


add to cart
2011 Tool Guide
From the editors of Fine Woodworking and Fine Homebuilding 225 tools tested $9.99 more info...

posted in: blogs, AWFS, new tool news, waterbased finish
Add CommentAdd Comment PrintPrint
Back to List

Comments (3)

JNorman JNorman writes: Ace, Charles Neil gave me a half pint to test and I've been using it on pens. I apply 4-5 coats on the lathe with maybe 2 minutes drying time in between, then sand lightly with 600 grit, then apply 4-5 more coats. Then I buff with the Beall system. This gives a durable, hard finish with a high shine. Not quite a friction finish, but close.

Norm
Posted: 4:35 am on July 26th

JNorman JNorman writes: Ace, Charles Neil gave me a half pint to test and I've been using it on pens. I apply 4-5 coats on the lathe with maybe 2 minutes drying time in between, then sand lightly with 600 grit, then apply 4-5 more coats. Then I buff with the Beall system. This gives a durable, hard finish with a high shine. Not quite a friction finish, but close.

Norm
Posted: 4:33 am on July 26th

Ace_HoleInOne Ace_HoleInOne writes: Now this is interesting. They always seem to push the envelope trying and developing new finishes.

From a loyal General Finishes fan. Can't wait to get my hands on some! Wonder if you can friction apply?

-Ace-
Posted: 10:40 pm on July 25th

You must be logged in to post comments. Click here to login.