Reader's Gallery

No. 7 Shaker rocker, tiger maple

comments (2) June 15th, 2010 in Reader's Gallery

Chuck_Griffith Charles Griffith, member
thumbs up 11 users recommend
Knobs were turned across the grain for upper surfaces that would absorb dye to match the arms.
- CLICK TO ENLARGE Photo: Self
Add CommentAdd Comment
PrintPrint

This is the last of my Shaker chair exploratory. But 12 chairs in, I learned enough from this one to think that the exploring isn't over. Except for the stretchers, this chair was made from a single piece of 8/4 tiger maple that I got from Irion Lumber in Pennsylvania.

One adventure was turning the stretchers. My normal practice is to bake stretcher blanks to shrink them before turning so that after glue-up they'll expand for a super tight fit. But with figured wood, things are different. The wacky grain patterns of tiger maple dispel moisture in a random way. As a result each blank came out of the oven slightly bent. My spindle steady did its best to make turning possible, but sometimes its O-ring tires got so hot they practically melted. Next time I won't bake figured wood.

Another issue was the knobs for topping the front leg posts. Normally I've turned them with grain running between lathe centers. That's fine for stock that won't be colored, but it leaves an end-grain upper suface that's a sponge for dye. With nice tiger maple I wanted to avoid dark knob tops, so I turned the knobs across the grain. To make this easier I first rounded the blanks with my band saw before putting them on my screw chuck.

The chair was dyed using Moser's golden amber maple. I did one coat with fairly intense dye, followed by another with diluted dye to pop the grain of the figured areas. This was followed by one coat of Minwax Antique Oil Finish, a good penetrator used to accent the figure a little more. That was followed by five coats of a tung oil/varnish/linseed oil mixture rubbed on with 0000 steel wool.

 

 

 


Design or Plan used: Traditional Shaker. Visit Shaker to Fit.
posted in: Reader's Gallery, chair, shaker, maple, steam bending, oil, varnish
Add CommentAdd Comment PrintPrint
Back to List

Comments (2)

Chuck_Griffith Chuck_Griffith writes: Hi Twistjawa,

Thanks. Glad you like the chair. Am quite happy with it myself. Am in the process of insulating my workshop so no projects underway now. Next one will be a Shaker blanket chest with an arched top as an homage to the roof of the meetinghouse at New Lebanon. Am planning to make the top by coopering quarter-sawn cherry. Not sure exactly how I'll go about that, but have purchased an old compass plane for rounding the top. Should be fun, but probably not until August.

All the best,
Chuck
Posted: 2:48 pm on June 19th

twistjawa twistjawa writes: Another beauty Chuck! Love the color contrast between the dye and fabric. Working on any case pieces these days? I've been absent from my shop for a while and your furniture always inspires me to get my butt back in there.
Posted: 10:51 am on June 19th

You must be logged in to post comments. Click here to login.