Reader's Gallery

Walnut Entry Table

comments (0) March 8th, 2010 in Reader's Gallery

bjc1, member

4 users recommend

Add Comment
Print

The table top arose from two pieces of walnut that seemed to go together. The top has breadboard ends and the apron and legs are mortised and tenoned. The stretcher is joined to the legs with through tenons. I tried something new with the stretcher/leg tenons by laminating two pieces of maple to the tenon rather than doing wedged mortises. I'm not sure if this will affect the strength, but the table won't be subject to much stress anyway. Finish is sprayed poly rubbed to a low sheen.

Design or Plan used: My own design

posted in: Reader's Gallery, table, walnut

Add Comment Print