Kboz's 2009 Xmas Ornaments

comments (3) November 18th, 2009 in Reader's Gallery

KevinBoz KevinBoz, member
thumbs up 3 users recommend
- CLICK TO ENLARGE
Add CommentAdd Comment
PrintPrint

Continuing a tradition of turning ornaments for friends and family.

All of the material is leftover from other projects.

The finish is several coats of spray lacquer.

The one red figurine is Elmo for our Grandaughter.

 


Design or Plan used: My Own Design - Kevin Bozicevich
posted in: Reader's Gallery, wood turning, xmas ornaments project
Add CommentAdd Comment PrintPrint
Back to List

Comments (3)

fjkaram fjkaram writes: Looks like fun I'll give them a try.
Posted: 6:29 pm on December 19th

KevinBoz KevinBoz writes: Chuck: Thanks for the comment.

I used a cross slide vise (Harbor Freight for about 60 bucks) to hold the small blocks on the drill press.
Then used a 2” Forstner bit to drill the holes.

It was a lot of fun doing them.
I also used up a lot of the small scraps of exotic woods to make the long icicles.

Each one was different in design according to my momentary whims.

Best wishes for a nice Holiday Season.

Posted: 2:25 pm on December 3rd

sedcokid sedcokid writes: I really like your ornaments. I see too that this is your design, they are beautiful! I enjoy making ornaments and giving them away as well. However I have never made anything like this. The hole in the center is that drilled or an inside/outside type? If you care to comment on my questions or give me anyother ideas you may email me at chuckglo@comcast.net

Thanks for sharing,
Chuck
Posted: 7:28 am on December 3rd

You must be logged in to post comments. Click here to login.